| High Alumina Wear Linings Anti Impact Ceramic Cube alumina ceramic sleeve applied in mining industry |
Technical Data:
| Category |
HC90 |
HC92 |
HC95 |
HCT95 |
HC99 |
HC-ZTA |
ZrO2 |
| Al2O3 |
≥90% |
≥92% |
≥95% |
≥ 95% |
≥ 99% |
≥75% |
/ |
| ZrO2 |
/ |
/ |
/ |
/ |
/ |
≥21% |
≥95% |
| Density |
>3.50g/ cm3 |
>3.60g/cm3 |
>3.65g/cm3 |
>3.70g/cm3 |
>3.83g/cm3 |
>4.10g/cm3 |
>5.90g/cm3 |
| HV 20 |
≥900 |
≥950 |
≥1000 |
≥1100 |
≥1200 |
≥1350 |
≥1100 |
| Rock Hardness HRA |
≥80 |
≥82 |
≥85 |
≥88 |
≥90 |
≥90 |
≥88 |
| Bending Strength MPa |
≥180 |
≥220 |
≥250 |
≥300 |
≥330 |
≥400 |
≥800 |
| Compression strength MPa |
≥970 |
≥1050 |
≥1300 |
≥1600 |
≥1800 |
≥2000 |
/ |
| Fracture Toughness KIc MPam 1/2 |
≥3.5 |
≥3.7 |
≥3.8 |
≥4.0 |
≥4.2 |
≥4.5 |
≥7.0 |
| Wear Volume |
≤0.28 cm3 |
≤0.25cm3 |
≤0.20cm3 |
≤0.15cm3 |
≤0.10 cm3 |
≤0.05cm3 |
≤0.02cm3 |
|
Ceramic sleeve lined pipe fittings applied in mining industry
The big diameter ceramic sleeve is always a big problem for the ceramic tube manufacturers since it's very difficult to control the deformation rate of the ceramic sleeve after it's sintering .Also It will also need an advanced and big isostatic pressing machine to do this .So it will not only express the company's production capability ,but company's technology. Right now, our factory have owned both advantages which are wear resistant ceramic pressing facilities and technologies.
We met some difficulties of course when we manufacturing the ceramic sleeves and we handled all the problems after the efforts of our research and engineering people .Also we created a very convenient installation machine to do the ceramic sleeve installation into the pipes since the sleeve is very big and heavy .After a month working ,we finished this 20' container 95% alumina ceramic sleeve lined pipes ,T pipes and elbows and customers are also very appreciated about our rapid reaction and big efforts in this projects applied in the mining slurry conveying system.
Sintering as a whole ceramic tube or ceramic sleeve,and then assemble it into the steel pipe or stainless steel pipe with our high-strength-temperature-resistant epoxy adhesive. The ceramic sleeve lined pipe has applied a lot in the mining industry ,like mining slurry pipe,mining dust removing pipe ,mining slag conveying pipe ,elbows and T pipes.
Ceramic Wear Liner material:
-92% Alumina
-95% Alumina
-RBSiC Silicon carbide
-ZTA liner
Our Team
Product You May Like
FAQ
- Are you a direct manufacturer or trader?
We has been founded on 1997 and now has developed into a group company owning three factories, manufacturing alumina powder, alumina grinding media, wear resistant ceramic liner.
Also we have our own equipment plant which manufacture rubber backed ceramic panel, pipe and cyclone.
2.Can you supply samples to check the quality?
Free samples with small quantity can be sent for quality checking.
Express fee can be reduced from bulk order.
3.What is the delivery time?
Generally 7~30 days according to the Order quantity.
4.What is your payment term?
T/T, L/C at sight can be accepted. Also it can be negotiated.
5.What is your main markets?
Australia, Russia, Ukraine,South Africa, Panama, Chile, Peru, Brazil, USA and so on.
6.Can you accept small order?
Yes, orders small or big are from your trust. We will do the best to meet your requirements.
7.Can you receive orders with bulk quantity?
Yes, the production capacity is 18000 tons per year. We have ability to accept the big orders.
8.Can you speak English?
Yes, our staff can speak and write English very well. We can supply 7*24 service and can reply your inquiry within short time.
9. The full range of the products you manufacture?
We manufacture Ceramic Wear Liner, Pipe&Pipe fitting, Cyclone.
Ceramic Grinding Media
Grinding Mills&Equipment lined with ceramics
10. Are your facility ISO Qualified?
Yes, we are qualified manufacturer.
ISO9001certificate,ISO14001 certificate,ISO 45001certificate have been acquired.
Audited Supplier 
){kind=link}
){kind=link}