Ceramic Wearing Compound Alumina Filled

• Customization: Available
• Standard: GB, ISO
• Application: Industrial Ceramic, Wearing Protection
• Model NO.: Epoxy
• Material: Aluminum
• Type: Gray Black
• Quality: First Class
• Sample Days: 1days
• Market: The Global
• Trade Method: EXW/Fob/CIF/CFR
• Transport Package: Carton Box, in Wooden Pallet
• Specification: 0.5-1; 1.5-2.5
• Trademark: Firstar
• Origin: Shandong
• HS Code: 6909120000
• Production Capacity: 20000

Product Description

Ceramic Wearing Compound Alumina Filled Epoxy
 

Product Description

 

Place of Origin:Shandong, China
Type:Ceramic Plates
Application:Industrial Ceramic, Wearing protection
Material:Alumina Ceramic
Model Number:Ceramic Bead Filled Expoxy
Brand Name:Firstar
Processing Service:Bending, Cutting, Punching, Moulding
Name:High impact wearing compound
Color:Gray Black
Shelf life:12 Months
Material::High Alumina Ceramic bead,Epoxy
Certificate:ISO9001:2015
Packing:Ctns
Weight Ratio(A:B):2:1
Full curing time(h)::4
Package:10kg

Item	Index
Color	Grey(White Grain)
Density(g/cm3)	2.0
Weight Ratio(A:B)	2:1
Operating time(min)	10~30(can be customized)
Minimum curing time(min)	30
Full curing time(h)	4
Hardness after solidify(Shore D)	100.0
Compressive strength(Mpa)	111.0
Shear strength(Mpa)	32
Working temperature(ºC)	-20~80(Customized for high temperature)

Detailed Photos

Qimingxing's wearing compounds are unique patented epoxy resin systems containing diamond hard ceramic beads that resist sliding abrasion. Directions for use-surface preparataion: Proper surface preparation is critical to the long termm performance of this product.The exact requirements vary with the severity of the application,expected service life, and initial substrate conditions. 1.On all vertical r overhaed applications,tacking welding expanded metal mesh onto the metal substrate is strongly reconnended prior to application of Wearing Compound. 2.Clean,dry,and abrade application surface.The more torough the degree of surface preparation, the better the performance of the application.If possbible,it is recommended that the surface be grit blasted to a Near White Metal(SSPC-SP10/NACE No.2)Standard.For less severe applications,roughening the sureface with hand tools is suirtable. Mixing:

1.Measure 2 parts resin to 1 part hardener by volume or weight on a clean and dry mixing surface and mix together until iniform in color.(If resin and hardener temperatures are 15ºC/60ºF or below,prehead resin only to about 21ºC/90ºF but not to exceed 37ºC/100ºF) 2.Immediately after abrasive blasting,rub a thin layer of material onto the surface to "wet" for good adhesion.) Operation:

1.Apply filly mixed material to the prepared surface. 2.Initially apply the material in a very thin layer to "wet" out the surface and avoid air entrapment. 3.At 25ºC/77ºF,the working time is 30 minutes.Working and solidify time depend on temperature and mass;the higher the temperature,the larger the mass , the faster the solidifying. 4.Functional cure time is 7 houra at 25ºC/77ºF. 5.Caution!Use approved,positive-pressure,supplied-air respirator when welding or torch cutting near cured compound. Use approved self-contained breathing apparatus when burning,welding,or torch cutting indoors near cured compund.Use approved respirator for dests and mists when grinding or machining cured compound. Do not use open flame on compound.See other cautions on Material Safety Data Sheet.
 

Other hot sale products

 

 

Company Profile

 

 ZIBO QIMINGXING NEW MATERIAL is located in Zibo, Shandong,Near Qingdao port. With an excellent geographical location and a convenient logistics system,This enable us to provide you varies transportation modes (by express/air/sea) according to your needs. Also, ensure us OTD and save your shipping cost. Our 86700 m2 factory has obtained ISO 9001 and ISO 14001 certification and employs over 350 staff members who enable us to provide you with fully custom services upon request.

We accept customized designs, packing, logo or custom material. We can make custom design based on your inquiry. We provide NDA agreement to keep your design in private.
Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee your satisfaction.
Our business staff have 7~10 years of experience in the industry and can provide you with quality services. All your inquiries will be responded within 24 hours.



                   PROFESSIONAL
                   FULL SERVICE   
      PROTECTION FOR YOUR BENEFIT

FAQ

Q: What is your experience in your products?
A: We have 23 years experience in this industry line. We are professional manufacturer in this area.
 
Q: What is your MOQ?
A: The MOQ is different as per different products, for example, 1 Ton for ceramic ball.
 
Q: Can you accept small quantity sample order before production?
A: Yes, we can offer sample for your testing first.

Q: Can you provide free sample?
A: Yes, within 10kg.
 
Q: What is your production time?
A: We have large stock for standard products. Normally within 7-10days after receipt the deposit.
 
Q: What are your payment terms?
A: T/T, L/C, Western Union