Product Introduction :
| Category |
HC90 |
HC92 |
HC95 |
HCT95 |
HC99 |
HC-ZTA |
ZrO2 |
| Al2O3 |
≥90% |
≥92% |
≥95% |
≥ 95% |
≥ 99% |
≥75% |
/ |
| ZrO2 |
/ |
/ |
/ |
/ |
/ |
≥21% |
≥95% |
| Density |
>3.50g/ cm3 |
>3.60g/cm3 |
>3.65g/cm3 |
>3.70g/cm3 |
>3.83g/cm3 |
>4.10g/cm3 |
>5.90g/cm3 |
| HV 20 |
≥900 |
≥950 |
≥1000 |
≥1100 |
≥1200 |
≥1350 |
≥1100 |
| Rock Hardness HRA |
≥80 |
≥82 |
≥85 |
≥88 |
≥90 |
≥90 |
≥88 |
| Bending Strength MPa |
≥180 |
≥220 |
≥250 |
≥300 |
≥330 |
≥400 |
≥800 |
| Compression strength MPa |
≥970 |
≥1050 |
≥1300 |
≥1600 |
≥1800 |
≥2000 |
/ |
| Fracture Toughness KIc MPam 1/2 |
≥3.5 |
≥3.7 |
≥3.8 |
≥4.0 |
≥4.2 |
≥4.5 |
≥7.0 |
| Wear Volume |
≤0.28 cm3 |
≤0.25cm3 |
≤0.20cm3 |
≤0.15cm3 |
≤0.10 cm3 |
≤0.05cm3 |
≤0.02cm3 |
1.Alumina cubes
The Ceramic Cube is a high-performance abrasion and impact resisting linings for high-impact, high-pressure applications in which ceramic tile may not have sufficient structural resistance, and high-performance rubber may not offer the required wear life. In extreme applications, the Cube liners can be installed in a matrix or abrasion resistant steel plate to provide structural support for the ceramic/rubber matrix and provide exceptional wear life where competing products cannot.
Used in heavy industry for years as a cost-effective, wear-resistant solution, these lightweight materials offer high durability, strength, and excellent abrasion and corrosion resistance. Alumina wear resistant compositions include:
l Alumina 92: most common wear product with great wear resistance
l Alumina 95: increased wear performance
l Alumina 96: premium alumina for best wear resistance
l Zirconium toughened alumina(ZTA): increased strength and impact resistance
2.Product features:
> High hardness
> Superior abrasion and impact resistance
> Corrosion and chemical resistance
> Light weight
> Easy installation by epoxy resin or bolt
> Improve your working environment-noise, vibration and safety
3. Product Specification:
- Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.
- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.
- Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm
- Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)
- Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc.
- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.
4. Ceramic wear lining tiles for a variety of applications:
Processing equipment:
Pharmaceutical clean rooms/Food processing plants/Grain handling/Mineral processing/Cement manufacturing/Chemical processing/Large Cyclones/Coal-fired power plants/Steel Mills/Asphalt Plants/Petrochemical plants/Pulp and paper mills.
Our Company :
ZIBO QIMINGXING NEW MATERIAL is located in Zibo, Shandong,Near Qingdao port. With an excellent geographical location and a convenient logistics system,This enable us to provide you varies transportation modes (by express/air/sea) according to your needs. Also, ensure us OTD and save your shipping cost. Our 86700 m2 factory has obtained ISO 9001 and ISO 14001 certification and employs over 350 staff members who enable us to provide you with fully custom services upon request.
We accept customized designs, packing, logo or custom material. We can make custom design based on your inquiry. We provide NDA agreement to keep your design in private.
Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee your satisfaction.
Our business staff have 7~10 years of experience in the industry and can provide you with quality services. All your inquiries will be responded within 24 hours.
PROFESSIONAL
FULL SERVICE
PROTECTION FOR YOUR BENEFIT
The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one,Two-in-one vulcanized ceramic runner sheet,ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.
Packaging :
1.Packaged with carton box.
2.There are compartments in the cartons to prevent friction.
About package and shipping mark all could be customzied.
Kindly contact with Eileen please : )
FAQ :
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: Is the sample free ?
A: Yes,we offer free samples.
The sample air shipping fee will be return when bulk order.
Q: How long is your delivery time ?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: What is your terms of payment ?
A: 30% T/T in advance ,balance before shippment.
Q: Accept customized?
A: Yes.Kindly send all your details to our worker please.
If you have any questions, kindly contact with Amy : )
Other Hot Sale :
Different kinds of products : Ceramic Mosaic Pieces, Ceramic Pipe Tiles, Ceramic Curved Tiled(with or witout holes), Ceramic Tapered Tiles, Ceramic Cylinders, Stell Lined with Ceramic Tiles, Irregular Shaped Tile, Clipping Ceramic Tiles Interlocking Bricks.
We have so many kinds of size.And we are also accept customized.
){kind=link}