Customizable Mine Tee Yee Pipes Elbows Bend Lined with Wear Resistant Alumina Ceramic Lining

Product Description

Customizable Mine Yee Pipes Elbows Lined with Wear Resistant Alumina Ceramic Lining

Company Profile

QMX is manufacturer, supplier, exporter of ceramic lined components, ceramic lined products, ceramic lined bends,ceramic lined pipes, etc. Ceramics is produced from high purity fine grain aluminum oxide. The necessary forming of shapes is done in its green or pre sintered phase. The products are then sintered in a kiln at extremely high temperature.
QMX manufactures ceramic tiles in the form of weldable and pastable tile as well as pipe sections of various diameters for installation at site and more specifically for lining of fabricated pipes, bends and fittings for pheumatic conveying applications specially for conveying of pulverised coal in thermal power plants.
This sinteredproducts consist of dense alumina with hardness of approximately 9 Mohs and can withstand temperature up to 1000C

Wear  Resistant Ceramic Liners
our ceramic range has three different alumina composition (92%, 95% and ZTA) products to suit the various mining applications.The products have high density, high hardness, low wear loss, anti corrosion, long using life properties.

Tile Specification:

	92	95	T95	99	ZTA	ZrO2
Density(g/cm³)	≥3.6	≥3.65	≥3.7	≥3.83	≥4.15	≥5.9
Al2O3(%)	≥92%	≥95%	≥95%	≥99%	≥75%	/
ZrO2 +Y2O3	/	/	/	/	≥21%	≥99.8%
Bending Strength(MPa)	≥220	≥250	≥300	≥330	≥400	≥800
Compressive Strength (MPa)	≥1050	≥1300	≥1600	≥1800	≥2000	/
Fracture Toughness(MPa.m1/2)	≥3.2	≥3.2	≥3.5	≥3.5	≥5.0	≥7.0
Rockwell Hardness HRA	≥82	≥85	≥88	≥89	≥90	≥88
Vickers Hardness HV20(MPa)	≥950	≥1000	≥1100	≥1200	≥1400	≥1100
Wear Volume(cm³)	≤0.25	≤0.20	≤0.15	≤0.10	≤0.05	≤0.05

 

Composite Ceramic Liners 

ceramic wear liners range include composite ceramic liners or Steel backed and studded as per requirements. We also have a range of molded ceramic in rubber with CN backing. The liners can be customized depending on the application.

 Lining rubber is designed primarily to be applied as a lining to protect your equipment from the damaging effects of abrasion and impact forces or chemical attack.

Detail Information:

Whole plate(mm)	150x300,300x300,500x500,600x450 etc
Ceramic Size(mm)	Square Tile: 10x10,20x20,33x33,50x50,100x100,150x100,etc
	Hexagonal Tile: 12x3, 12x6, 19x7, 19x12.5, 19x25, etc
	Locking block with lock and groove: 38*38, 40*40, 30*30, etc
	Dimple Tile: 20x20 with 5dimples, 20x30 with 18 dimples, 20x30 with 13 dimples, 20x20 with 1 semi-spherial surface
Ceramic Thickness(mm)	3-75mm
Alloy Steel Size(mm)	thicknedd 3-10mm
Rubber Thickness(mm)	Depends on the impact stress expected
Ceramic Cylinder/rod	6x6mm, 15x15mm, 20x20mm, 31x31mm, 40x40mm, 50x50mm etc

  Pipe Lined With Ceramics Cyclone

Different Shipping Ways

 Wearing Compound Ceramic Bead Filled Epoxy

The compound is a ceramic bead filled ashesive to apply to areas where tiling is not possible or effective. It has wear resistant qualities, is easy to apply and used vastly in maintenance of lined areas

Silicon Carbide
 

RBSIC(SISIC) silicon carbide lining has properties of high strength, high wear resistance, corrosion resistance high temperature resistance, which has been widely used as the liners or parts in coarse particles classification, concetration, wear resisting lining of hydraulic cyclones, flue gas desulphurization pipes, coal slurry conveyor pipelines, washing and mineral processing industry

Polyurethane Wear Products

Specific Density: 1.3Kg/L
Shore A Hardness: 35-95
Akron Abrasion: <0.053(cm3/1.61km)
Working Temperature: -25-80degree
Expansion Strength: 70KN/m
Tear Strength: 40-100KN/m
Tensile Strength: 30-50MPa
Deformation: <8%

FAQ

1. Are you are trading company or a factory? 
We are a leading factory, manufacturing high alumina ceramic wear resistant liners in Zibo, China 

2. What is your monthly capacity? 
800 ton per month 

3. What kinds of ceramic wear resistant liners do you manufacture? 
92%alumina liner, 95%alumina liner, T95%alumina liner, zirconia tile liner, ZTA tiles , ceramic-rubber composite plates, wearing compound 

4. What is the delivery time? 
If we have stock, the delivery time is within 3days after order confirmed. If there is no stock, it is usually 13days. 

5. Can you manufacture ceramic liner according to customers' desgin? 
Yes, we have 5 engineers and we can produce ceramic parts according to the drawings of the customers. 

6. What is the packing? 
carton, and then wooden pallet or wooden box, 20~25tons per 1*20"FCL 

7. What is the nearest port? 
Qingdao port 
 

Our Advantages

Zibo Qimingxing New Material Incorporated Co.,Ltd

1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over350 staffs.
4.Three Own-designed production lines, the ball mils are own produced.

QMX provides wear resistant solutions to all industries including Mining, Mineral , Base & Precious Metal Smelting, Power Generation (coal fired power stations), Iron and Steel, Cement & Lime Manufacture, and Petro-Chemical Refining and Production.
 
The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one,Two-in-one vulcanized ceramic runner sheet,ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.