| Standard: | ISO9001:2015 |
|---|---|
| Application: | Metallurgical Machinery, Cement Plant, Mining Machine, Coal Yard |
| Material: | Aluminum |
| Type: | Wear Resistant Ceramic |
| Color: | White |
| Al2O3: | >92% |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Mineral Processing equipment operates in some of the harshest and remote locations. It is crucial to the Mineral Processing industries that this equipment continues to operate efficiently and its lifecycle is maximised to minimise down time. By appropriately protecting equipment from the extreme wear caused by the high speed and flow rates of ore when processed as a slurry ensures better equipment longevity. Slurry is highly abrasive and can not only cause wear damage to wet processing equipment but also with the inclusion of chemicals and heat, there is constant risk of corrosion and dangerous leakage.
Wear Protection ceramic Linings are used throughout Mineral Processing to protect the steel surfaces of equipment from wear and corrosion. They are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders and feed spouts or chutes.
Zibo Qimingxing produce and supply wide range of High Alumina Ceramic Liner having size from 3mm thick to 50 mm thick. We also supply liner in standard sizes and pre-engineered wear resistant tiles as per requirement in pastable and weldable quality. We also supply liner in Hex and square pattern mounted on rubber or Polyester mat to form flexible mats for installing on any shape, contour radius surface to make the surface wear and corrosion resistant.
Zibo Qimingxing manufacture high alumina ceramic-lined products made from fine grain, high purity, alpha aluminum oxide, material almost diamond hard can be formed in a variety of pre-engineered standard and custom sizes and shapes. High alumina ceramic exhibits abrasion, corrosion, electrical, chemical, and erosion resistance. Alumina ceramics resist the effects of radiation that can destroy other materials. Alumina ceramic can have very high dielectric strength, high resistivity and low dielectric loss thus it is also use in insulators and electronic components. High Alumina Ceramics is the most mature of the engineering ceramics, offering excellent electrical insulation properties together with high hardness and good wear resistance. It has a high melting point, high hardness and high mechanical strength. Our high density alumina ceramic linings and tiles prevent destructive wear in conveying, processing, and storage equipment.
| Character | 92 | 95 | T95 | 99 | ZTA | ZrO2 |
| Density(g/cm³) | ≥3.6 | ≥3.65 | ≥3.7 | ≥3.83 | ≥4.15 | ≥5.9 |
| Al2O3(%) | ≥92% | ≥95% | ≥95% | ≥99% | ≥75% | / |
| ZrO2 +Y2O3 | / | / | / | / | ≥21% | ≥99.8% |
| Bending Strength(MPa) | ≥220 | ≥250 | ≥300 | ≥330 | ≥400 | ≥800 |
| Compressive Strength (MPa) | ≥1050 | ≥1300 | ≥1600 | ≥1800 | ≥2000 | / |
| Fracture Toughness(MPa.m1/2) | ≥3.2 | ≥3.2 | ≥3.5 | ≥3.5 | ≥5.0 | ≥7.0 |
| Rockwell Hardness HRA | ≥82 | ≥85 | ≥88 | ≥89 | ≥90 | ≥88 |
| Vickers Hardness HV20(MPa) | ≥950 | ≥1000 | ≥1100 | ≥1200 | ≥1400 | ≥1100 |
| Wear Volume(cm³) | ≤0.25 | ≤0.20 | ≤0.15 | ≤0.10 | ≤0.05 | ≤0.05 |
Zibo Qimingxing upply and stock a full range of a high density, fine grain and high wear resistant alumina ceramic. It prevent erosion and abrasive wear in conveying and bulk material handling systems, as well in piping systems.
--Plain tile ranging from 3mm-50mm
--Weldon tile ranging from 10mm-50mm
--Pipe tile ranging from 12mm-50mm
--Hex tile ranging from 3mm-25mm
--Interlock tile with T/G (Tongue & Groove) ranging from12mm-50mm
--Pre engineered tile ranging from 12mm-25mm for cyclone installation specially.
1.Established in 1997,26 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
Ceramic Liner: plain ceramic liner, weldable ceramic liner, trapezoidal ceramic liner, ceramic cylinder, ceramic block, alumina wear liner, rubber backed ceramic panel, ceramic composite panel, mining wear liner and so on.
Ceramic Grinding Media: 92% alumina media, 95% alumina media, 99% alumina media, ZTA 370 grinding media, ZTA380 grinding media, ZTA 450 grinding media, ZTA 470 grinding media, silicate zirconia grinding media, yttria stablized zirconia grinding media, ceria stablized zirconia grinding media and so on.
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: Is the sample free ?
A: Yes,we offer free samples.
The sample air shipping fee will be return when bulk order.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}