| Customization: | Available |
|---|---|
| Type: | Angle Grinder |
| Power Source: | Electricity |
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| .Total volume | 46L |
| ·Net capacity | 25L |
| ·Separator type | centrifugal separator |
| ·Cooling water flow rate | 6.8m³/Hour |
| ·Cooling water temperature | 8-12° Cold water or tap water |
| ·Cooling water pressure | 0.4Mpa |
| ·cooling water inlet and outlet | Hose with diameter of 15MM |
| ·Pressure gauge at inlet | 0.2Mpa |
| ·Temperature meter of discharge port | 0-100°(adjustable) |
| . cooling form | there is a guide tank between the grinding inner cylinder and the grinding outer cylinder |
| ·Feed method | Feed is delivered by pump |
| ·Color | be subject to actual production |
| ·pump type | (Ingersoll RAND) Pneumatic diaphragm pump |
| ·Machine seal circulating pump model | Orick gear pump |
| ·Power | Three-phase 380V-50HZ |
| ·Main engine power | 45KW motor (Huali/South Anhui) separation motor 7.5KW. |
| ·Frequency Converter | 55KW |
| ·Drive | the linear speed can be adjusted by the pulley |
| ·Speed | The speed is 10-14 m/s linear speed with frequency conversion |
| .Shaft speed | 650-1200rpm |
| ·Protection level | IP55 |
| ·Control system | PLC touch screen control (Siemens) |
| ·Protection device | (meter, speed, current, etc.) analog pressure induction protection device. The host will automatically stop/shut down when the following situations occur: when the pressure is too high due to abnormal conditions such as blockage in the barrel; Leakage of mechanical shaft seal or shaft seal plate causes no coolant in the cooling bucket; Circulating pressure sensing protection, such as mechanical shaft seal or cooling circulation tube blocking; Temperature analog quantity induction protection, the temperature in the barrel is too high. |
){kind=link}