Great Pin Type Sand Mill with Nano Scale

• Type: Angle Grinder
• Power Source: Electricity
• Application: Chemical
• Material: Steel
• Working Style: High-speed universal
• Equipment: Grinding Equipment
• Model NO.: 25L
• Product Line: Sand Mill
• Transport Package: Nude Packing or Wooden Framed Case Framed
• Specification: un-standard, can be customized
• Trademark: qimingxing
• Origin: Zibo, China

Product Description

Great Pin Type Sand Mill with Nano Scale

Introduction
Great pin type sand Mill with nano scale using for grinding large Qty. of nano materials and are designed to work with 0.1-0.2mm grinding media; The rod and pin grinding system of turbine structure can produce high strength shear force and crushing force, and reach the particle size requirement in a short time, which is the most effective method of economic benefit to obtain nano particles better than other grinding equipment. After the material enters the grinding barrel through the pre-dispersing cylinder and grinding, it is discharged smoothly through the separator with large flow area.

1.Basic configuration:

.Total volume	46L
·Net capacity	25L
·Separator type	centrifugal separator
·Cooling water flow rate	6.8m³/Hour
·Cooling water temperature	8-12° Cold water or tap water
·Cooling water pressure	0.4Mpa
·cooling water inlet and outlet	Hose with diameter of 15MM
·Pressure gauge at inlet	0.2Mpa
·Temperature meter of discharge port	0-100°(adjustable)
. cooling form	there is a guide tank between the grinding inner cylinder and the grinding outer cylinder
·Feed method	Feed is delivered by pump
·Color	be subject to actual production

2.Form of feeding

·pump type	(Ingersoll RAND) Pneumatic diaphragm pump
·Machine seal circulating pump model	Orick gear pump

3. Electrical driving part

·Power	Three-phase 380V-50HZ
·Main engine power	45KW motor (Huali/South Anhui) separation motor 7.5KW.
·Frequency Converter	55KW
·Drive	the linear speed can be adjusted by the pulley
·Speed	The speed is 10-14 m/s linear speed with frequency conversion

3. Electrical driving part

.Shaft speed	650-1200rpm
·Protection level	IP55
·Control system	PLC touch screen control (Siemens)
·Protection device	(meter, speed, current, etc.) analog pressure induction protection device. The host will automatically stop/shut down when the following situations occur: when the pressure is too high due to abnormal conditions such as blockage in the barrel; Leakage of mechanical shaft seal or shaft seal plate causes no coolant in the cooling bucket; Circulating pressure sensing protection, such as mechanical shaft seal or cooling circulation tube blocking; Temperature analog quantity induction protection, the temperature in the barrel is too high.

 ZIBO QIMINGXING NEW MATERIAL is located in Zibo, Shandong,Near Qingdao port. With an excellent geographical location and a convenient logistics system,This enable us to provide you varies transportation modes (by express/air/sea) according to your needs. Also, ensure us OTD and save your shipping cost. Our 86700 m2 factory has obtained ISO 9001 and ISO 14001 certification and employs over 350 staff members who enable us to provide you with fully custom services upon request.

We accept customized designs, packing, logo or custom material. We can make custom design based on your inquiry. We provide NDA agreement to keep your design in private.
Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee your satisfaction.
Our business staff have 7~10 years of experience in the industry and can provide you with quality services. All your inquiries will be responded within 24 hours.



                   PROFESSIONAL
                   FULL SERVICE   
      PROTECTION FOR YOUR BENEFIT