Alumina Tiles as Ceramic Wear Lining for Pasting Portable Crushing & Screening Plant

• Application: Refractory, Structure Ceramic, Industrial Ceramic
• Material: Alumina Ceramic
• Type: Ceramic Plates
• Usage: Lining of Equipment and Pipe
• Trade Term: Fob/CFR/CIF/DDU/DDP/Express
• Color: White
• Model NO.: Alumina
• Market: Golbal
• Transport Package: Carton and Wooden Pallet
• Specification: 3/6/11/12/13/24/25mm
• Trademark: qimingxing
• Origin: Shandong
• HS Code: 6909120000
• Production Capacity: 18000

Product Description

Alumina tiles as Ceramic wear Lining for Pasting Portable Crushing & Screening Plant

Detailed Photos

 

Specification:

Category	HC90	HC92	HC95	HCT95	HC99	HC-ZTA	ZrO2
Al2O3	≥90%	≥92%	≥95%	≥ 95%	≥ 99%	≥75%	/
ZrO2	/	/	/	/	/	≥21%	≥95%
Density	>3.50g/ cm3	>3.60g/cm3	>3.65g/cm3	>3.70g/cm3	>3.83g/cm3	>4.10g/cm3	>5.90g/cm3
HV 20	≥900	≥950	≥1000	≥1100	≥1200	≥1350	≥1100
Rock Hardness HRA	≥80	≥82	≥85	≥88	≥90	≥90	≥88
Bending Strength MPa	≥180	≥220	≥250	≥300	≥330	≥400	≥800
Compression strength MPa	≥970	≥1050	≥1300	≥1600	≥1800	≥2000	/
Fracture Toughness KIc MPam 1/2	≥3.5	≥3.7	≥3.8	≥4.0	≥4.2	≥4.5	≥7.0
Wear Volume	≤0.28 cm3	≤0.25cm3	≤0.20cm3	≤0.15cm3	≤0.10 cm3	≤0.05cm3	≤0.02cm3

NOTE: Support customization, please send the parameters of your specific requirements to our online staff.

Product Introduction :

QMX ceramic lining pieces include Hexagonal Tiles, Square, or rectangular linings pieces with/without dimples.
The bulk pieces can be stuck on nylon mesh, kraft paper, and Acetate cloth to get the mats with sizes:150x150mm, 250x250mm, 500x500mm mats, etc.

The small pieces can also be vulcanized into the rubber backed panel or pulley lagging pads.

1.Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.
2.Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.
3.Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm
4.Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)
5.Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc.
6.Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.

Our Company :


1. Established in 1997,24 years experience in wear solutions products.
2. The factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over 260 staffs.
4. Three Own-designed production lines, the ball mils are own produced.


The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one, Two-in-one vulcanized ceramic runner sheet, ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.

Packaging :

 

Company Profile

 

 ZIBO QIMINGXING NEW MATERIAL is located in Zibo, Shandong,Near Qingdao port. With an excellent geographical location and a convenient logistics system,This enable us to provide you varies transportation modes (by express/air/sea) according to your needs. Also, ensure us OTD and save your shipping cost. Our 86700 m2 factory has obtained ISO 9001 and ISO 14001 certification and employs over 350 staff members who enable us to provide you with fully custom services upon request.

We accept customized designs, packing, logo or custom material. We can make custom design based on your inquiry. We provide NDA agreement to keep your design in private.
Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee your satisfaction.
Our business staff have 7~10 years of experience in the industry and can provide you with quality services. All your inquiries will be responded within 24 hours.



                   PROFESSIONAL
                   FULL SERVICE   
      PROTECTION FOR YOUR BENEFIT
 

FAQ

Q: What is your experience in your products?
A: We have 23 years experience in this industry line. We are professional manufacturer in this area.
 
Q: What is your MOQ?
A: The MOQ is different as per different products, for example, 1 Ton for ceramic ball.
 
Q: Can you accept small quantity sample order before production?
A: Yes, we can offer sample for your testing first.

Q: Can you provide free sample?
A: Yes, within 10kg.
 
Q: What is your production time?
A: We have large stock for standard products. Normally within 7-10days after receipt the deposit.
 
Q: What are your payment terms?
A: T/T, L/C, Western Union