92% Alumina Ceramic Tiles Square Mosaic Pieces As Wear Resistant Plulley Lagging Ceramic
Product Parameters
| |
92 |
95 |
T95 |
99 |
ZTA |
ZrO2 |
| Density(g/cm³) |
≥3.6 |
≥3.65 |
≥3.7 |
≥3.83 |
≥4.15 |
≥5.9 |
| Al2O3(%) |
≥92% |
≥95% |
≥95% |
≥99% |
≥75% |
/ |
| ZrO2 +Y2O3 |
/ |
/ |
/ |
/ |
≥21% |
≥99.8% |
| Bending Strength(MPa) |
≥220 |
≥250 |
≥300 |
≥330 |
≥400 |
≥800 |
| Compressive Strength (MPa) |
≥1050 |
≥1300 |
≥1600 |
≥1800 |
≥2000 |
/ |
| Fracture Toughness(MPa.m1/2) |
≥3.2 |
≥3.2 |
≥3.5 |
≥3.5 |
≥5.0 |
≥7.0 |
| Rockwell Hardness HRA |
≥82 |
≥85 |
≥88 |
≥89 |
≥90 |
≥88 |
| Vickers Hardness HV20(MPa) |
≥950 |
≥1000 |
≥1100 |
≥1200 |
≥1400 |
≥1100 |
| Wear Volume(cm³) |
≤0.25 |
≤0.20 |
≤0.15 |
≤0.10 |
≤0.05 |
≤0.05 |
Product Description
As a material, ceramic has beneficial anti-impact properties that prolong wear life and improve impact resistance. Ceramic wear liners are designed to be extremely resistant to abrasion even in high material flows and speeds, preventing material build-up.
Hard ceramic surfaces provide unsurpassable wear resistance while the elasticity of the rubber absorbs the impact of blows. Excellent wear resistance in applications with sliding wear and high material speeds
Installed in chutes, spouts, hoppers, transfer points and other applications subjected to wear, wear linings protect the assets and provide sufficient wear and chemical resistance to keep maintenance down and material flow up. When used in the correct application, long-lasting and robust wear linings make a substantial difference in improving process flow, machine uptime and safety
92% Al2O3 China Conductive Tiles Mats is a high-performance abrasion and impact resisting linings for high-impact, high-pressure applications in which ceramic tile may not have sufficient structural resistance, and high-performance rubber may not offer the required wear life. In extreme applications, the liners can be installed in a matrix or abrasion resistant steel plate to provide structural support for the ceramic/rubber matrix and provide exceptional wear life where competing products cannot.
Used in heavy industry for years as a cost-effective, wear-resistant solution, these lightweight materials offer high durability, strength, and excellent abrasion and corrosion resistance. Alumina wear resistant compositions include:
l Alumina 92: most common wear product with great wear resistance
l Alumina 95: increased wear performance
l Alumina T95: premium alumina for best wear resistance
l Zirconium toughened alumina(ZTA): increased strength and impact resistance
Certifications
Packaging & Shipping
Company Profile
1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over350 staffs.
4.Three Own-designed production lines, the ball mils are own produced.
We supply a wide range of pre-engineered alumina ceramic tiles tailor-made to suit any type of application such as short and long radius small and large bore pipes and pipe bends, square to round transitions, cones etc. The company also supply and install a range of pump impellers, expeller rings, and valves.
QMX provides wear resistant solutions to all industries including Mining, Mineral , Base & Precious Metal Smelting, Power Generation (coal fired power stations), Iron and Steel, Cement & Lime Manufacture, and Petro-Chemical Refining and Production.
The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one,Two-in-one vulcanized ceramic runner sheet,ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.
Hot Sales
FAQ
1. Are you are trading company or a factory?
We are a leading factory, manufacturing high alumina ceramic wear resistant liners in Zibo, China
2. What is your monthly capacity?
500-650ton per month
3. What kinds of ceramic wear resistant liners do you manufacture?
92%alumina liner, 95%alumina liner, T95%alumina liner, zirconia tile liner, ZTA tiles , ceramic-rubber composite plates, wearing compound
4. What is the delivery time?
If we have stock, the delivery time is within 3days after order confirmed. If there is no stock, it is usually 13days.
5. Can you manufacture ceramic liner according to customers' desgin?
Yes, we have 5 engineers and we can produce ceramic parts according to the drawings of the customers.
6. What is the packing?
carton, and then wooden pallet or wooden box, 20~25tons per 1*20"FCL
7. What is the nearest port?
Qingdao port
Audited Supplier 
){kind=link}
){kind=link}