Wear Resistant 92% 95% Alumina Ceramic Tiles Engineered for Maximum Wear Protection

Product Description

Wear-Resistant-Material Durable Weldable Alumina Ceramic Tiles for Chute Wear Protection
 

Product Description

Wear Protection ceramic Linings are used throughout Mineral Processing to protect the steel surfaces of equipment from wear and corrosion. They are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders and feed spouts or chutes.

The weldable ceramic liner is an ideal material for the surface wear resistance of conveying equipment of materials (such as ash, coal powder, refined ore powder, tailings, cement, etc.) in electric power, metallurgy, coal and other industries.

The weldable wear resistant ceramics are fixed by welding or gluing.After the wear resistant ceramics are pasted on the surface of the equipment, the application scope of wear resistant ceramic is greatly expanded. The weldable ceramic liner is suitable for wear resistance of pneumatic conveying system under high temperature, impact and other sever condictions. High temperature resistance up to 800ºC.

Qimingxing Ceramic wear tiles Series:
1. 92%,95%,T95%,99% Alumina ceramic tiles
2. ZTA(Zirconia Toughened Alumina) tiles/brick/block 
3. Ceramic Rubber and ceramic-Rubber-steel impact resistant liner
4. Monolihic Cyclone/ cyclone tiles/Ceramic Lined pipe fittings
5. High impact ceramic wearing compound 
 

 

Product Parameters

	92	95	T95	99	ZTA	ZrO2
Density(g/cm³)	≥3.6	≥3.65	≥3.7	≥3.83	≥4.15	≥5.9
Al2O3(%)	≥92%	≥95%	≥95%	≥99%	≥75%	/
ZrO2 +Y2O3	/	/	/	/	≥21%	≥99.8%
Bending Strength(MPa)	≥220	≥250	≥300	≥330	≥400	≥800
Compressive Strength (MPa)	≥1050	≥1300	≥1600	≥1800	≥2000	/
Fracture Toughness(MPa.m1/2)	≥3.2	≥3.2	≥3.5	≥3.5	≥5.0	≥7.0
Rockwell Hardness HRA	≥82	≥85	≥88	≥89	≥90	≥88
Vickers Hardness HV20(MPa)	≥950	≥1000	≥1100	≥1200	≥1400	≥1100
Wear Volume(cm³)	≤0.25	≤0.20	≤0.15	≤0.10	≤0.05	≤0.05

Applications

Welding type
Welding wear-resistant ceramics are fixed by welding or gluing. After the wear-resistant ceramic is installed on the surface of the equipment, the application range of the wear-resistant ceramic is greatly expanded. It is suitable for the abrasion resistance of the pneumatic conveying systems under severe working conditions such as high temperature and impact. The high-temperature resistance can reach 800 ºC.

Product features:
> High hardness 
> Superior abrasion and impact resistance 
> Corrosion and chemical resistance 
> Light weight 
> Easy installation by epoxy resin or bolt 
> Improve your working environment-noise, vibration and safety

Ceramic wear lining tiles for a variety of applications:
Processing equipment:
Pharmaceutical clean rooms/Food processing plants/Grain handling/Mineral processing/Cement manufacturing/Chemical processing/Large Cyclones/Coal-fired power plants/Steel Mills/Asphalt Plants/Petrochemical plants/Pulp and paper mills

Company Profile

1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over 400 staffs.
4.Three Own-designed production lines, the ball mils are own produced.
The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one,Two-in-one vulcanized ceramic runner sheet,ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.

FAQ

1. Are you are trading company or a factory? 
We are a leading factory, manufacturing high alumina ceramic wear resistant liners in Zibo, China 

2. What is your monthly capacity? 
800ton per month 

3. What kinds of ceramic wear resistant liners do you manufacture? 
92%alumina liner, 95%alumina liner, T95%alumina liner, zirconia tile liner, ZTA tiles , ceramic-rubber composite plates, wearing compound 

4. What is the delivery time? 
If we have stock, the delivery time is within 3days after order confirmed. If there is no stock, it is usually 13days. 

5. Can you manufacture ceramic liner according to customers' desgin? 
Yes, we have 5 engineers and we can produce ceramic parts according to the drawings of the customers. 

6. What is the packing? 
carton, and then wooden pallet or wooden box, 20~25tons per 1*20"FCL 

7. What is the nearest port? 
Qingdao port