| Customization: | Available |
|---|---|
| Standard: | GB |
| Application: | Construction Machinery, Cement Plant, Mining Machine, Thermal Power Plant, Coal Yard |
|
Still deciding? Get samples of US$ 1/kg
Request Sample
|
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Mineral Processing equipment operates in some of the harshest and remote locations. It is crucial to the Mineral Processing industries that this equipment continues to operate efficiently and its lifecycle is maximised to minimise down time. By appropriately protecting equipment from the extreme wear caused by the high speed and flow rates of ore when processed as a slurry ensures better equipment longevity. Slurry is highly abrasive and can not only cause wear damage to wet processing equipment but also with the inclusion of chemicals and heat, there is constant risk of corrosion and dangerous leakage.
Wear Protection ceramic Linings are used throughout Mineral Processing to protect the steel surfaces of equipment from wear and corrosion. They are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders and feed spouts or chutes.
|
|
HC92
|
HCT95
|
HCZTA
|
HCZR
|
|
Al2O3(%)
|
≥92%
|
≥95%
|
≥75%
|
/
|
|
ZrO2(%)
|
/
|
/
|
≥21%
|
≥99.8%
|
|
Bending Strength(MPa)
|
≥220
|
≥300
|
≥400
|
≥800
|
|
Fracture Toughness(MPam1/2)
|
≥3.7
|
≥4.0
|
≥5.0
|
≥7
|
|
Rockwell Hardness(HRA)
|
≥82
|
≥88
|
≥90
|
≥88
|
|
Vickers Hardness(MPa)
|
≥1000
|
≥1100
|
≥1350
|
≥1100
|
|
Wear Volume(cm3)
|
≤0.25
|
≤0.15
|
≤0.05
|
≤0.03
|
|
Density(g/cm3)
|
≥3.6
|
≥3.7
|
≥4.1
|
≥5.9
|
|
Component
|
Available Size
|
Steel Thickness
|
Rubber Thickness
|
Ceramic Thickness
|
|
Steel, Rubber, Ceramic
(3 in 1 or 2 in 1)
|
300*300/150/200/400/450*37mm
400*450*37mm
300*300/150/200/400/450*63mm
400*450*63mm
|
6mm
|
6/7mm
|
25/50mm
|
1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over350 staffs.
4.Three Own-designed production lines, the ball mils are own produced.
We supply a wide range of pre-engineered alumina ceramic tiles tailor-made to suit any type of application such as short and long radius small and large bore pipes and pipe bends, square to round transitions, cones etc. The company also supply and install a range of pump impellers, expeller rings, and valves.
QMX provides wear resistant solutions to all industries including Mining, Mineral , Base & Precious Metal Smelting, Power Generation (coal fired power stations), Iron and Steel, Cement & Lime Manufacture, and Petro-Chemical Refining and Production.
The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one,Two-in-one vulcanized ceramic runner sheet,ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.
1. Are you are trading company or a factory?
We are a leading factory, manufacturing high alumina ceramic wear resistant liners in Zibo, China
2. What is your monthly capacity?
800 ton per month
3. What kinds of ceramic wear resistant liners do you manufacture?
92%alumina liner, 95%alumina liner, T95%alumina liner, zirconia tile liner, ZTA tiles , ceramic-rubber composite plates, wearing compound
4. What is the delivery time?
If we have stock, the delivery time is within 3days after order confirmed. If there is no stock, it is usually 13days.
5. Can you manufacture ceramic liner according to customers' desgin?
Yes, we have 5 engineers and we can produce ceramic parts according to the drawings of the customers.
6. What is the packing?
carton, and then wooden pallet or wooden box, 20~25tons per 1*20"FCL
7. What is the nearest port?
Qingdao port
){kind=link}