92% 95% Alumina Ceramic Liners for Ball Mill

• Standard: ISO9001:2000
• Application: Metallurgical Machinery, Cement Plant, Mining Machine, Coal Yard
• Material: Aluminum
• Type: Wear Resistant Plate
• Color: White
• Al2O3: >92%
• Model NO.: 95-A
• Usage: Lining of Equipment and Pipe
• Wear Rate ‰: <0.1
• Ceramic Mohs Hard Ness: 9
• Shipping Way: Fob, CIF, DDP, DDU etc
• Size: Customzied
• Shape: Square
• Export Markets: Global
• Certification: ISO
• Function: Grinding
• Sample Time: 3-15 Days
• Bulk Order Time: 15-30 Days
• Customized: Accept
• Shipping Mark: Accept
• Transport Package: Carton Package, Then on Pallet
• Specification: Al2O3 over 92%
• Trademark: ZIBO QIMINGXING NEW MATERIAL
• Origin: China Shandong Zibo
• Production Capacity: 17000 Tons Per Year

Product Description

92% 95% Alumina Ceramic Liners For Ball Mill 

 

Product Introduction :

 

Category	HC92	HC95	HC-ZTA
Al2O3	≥92%	≥95%	≥75%
ZrO2	/	/	≥21%
Density	>3.60g/cm3	>3.65g/cm3	>4.10g/cm3
HV 20	≥950	≥1000	≥1350
Rock Hardness HRA	≥82	≥85	≥90
Bending Strength MPa	≥220	≥250	≥400
Compression strength MPa	≥1050	≥1300	≥2000
Fracture Toughness KIc MPam 1/2	≥3.7	≥3.8	≥4.5
Wear Volume	≤0.25cm3	≤0.20cm3	≤0.05cm3

The ceramic lining of ball mills is commonly used alumina wear-resistant ceramic lining bricks, also called high alumina lining bricks. They are generally pure white with interlocking slots. They are divided into straight bricks and trapezoidal bricks, half bricks and thin bricks. brick.


Wear-resistant ceramic liner features.
It has the characteristics of wear resistance, impact resistance, corrosion resistance, high temperature resistance, and convenient construction. It is used for materials in electric power, metallurgy, coal, petroleum, cement, chemical, machinery and other industries (such as ash, slag, coal powder, Mineral concentrate, tailings, cement, etc.) is an ideal material for the surface of conveying equipment. It is very safe and reliable to use under high-temperature corrosion, high-temperature wear or high-temperature corrosion. Its life is longer than cast stone, wear-resistant alloy cast steel, steel Plastic, steel, rubber and other materials are ten to twenty times higher.

How to use the ceramic wear liner of ball mill.
The ceramic liner of the ball mill is generally bonded with white cement or wear-resistant ceramic structural glue.
1. Preparation of the ball mill: Any bricks or cement residues, welding slag, rust, and oil stains on the inner surface of the ball mill should be removed. The smooth surface should be roughened to improve the bonding effect.
2. The installation of the lining bricks starts from the end face of the ball mill. All the end faces are installed with straight bricks and straight half bricks. All lining brick working faces should face the ball mill. The snap buttons of the installation parts should be fastened, and the bricks on the upper layer should overlap and be pressed tightly. On the joints of the two bricks below, the two rows of bricks should be installed staggered. After installing several lining bricks, you must use a rubber hammer or wooden hammer to gently tap the adhesive to spread the adhesive evenly between the brick and the brick and the brick and the wall to ensure the bonding quality and strictly control the brick and the brick. The gap should be less than 1.5mm.
3. After installing the two ends, start to install the cylinder, calculate the number of rows of straight bricks and oblique bricks according to the amount of lining bricks of the cylinder, and install them alternately according to the number of straight and oblique rows calculated in the second step to ensure the bottom of the lining bricks Close to the inner wall of the cylinder, the inner diameter of the lining bricks should be smoothly connected after being built. Each row along the length direction should use straight or oblique bricks of the same specification. Use half bricks to adjust the brick joints at the end to maintain each phase. The bricks of the two adjacent rows are staggered. If the straight bricks cannot enter the last row, install thin bricks and seal the gaps with cement.







Our Company :


1.Established in 1997,20 years experience in wear solutions products.
2.Factory is under expansion, the total construction area is 50,000 sqm.
3.ISO9001:2000 certified,over 260 staffs.
4.Three Own-designed production lines, the ball mils are own produced.






The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one, Two-in-one vulcanized ceramic runner sheet, ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.

Packaging :











 

1.Packaged with carton box.
2.There are compartments in the cartons to prevent friction.

 
About package and shipping marks all could be customized.

                                                                
 

FAQ :

Q: Are you a manufacturer?
A: We are a manufacturer for 23 years.

Q: Is the sample free?
A: Yes, we offer free samples.

Q: How long is your delivery time?
A: Generally it is 1-3 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.

Q: What are your terms of payment?
A: T/T 30% as the deposit, the balance against copy of B/L after shipment. 

Q: Accept customized?
A: Yes. We have a professional design team. Kindly send all your drawing to us.

If you have any questions, kindly contact Amy : )
 

Other Hot Sale : 
 
Different kinds of products: Ceramic Mosaic Pieces, Ceramic Pipe Tiles, Ceramic Curved Tiled(with or without holes), Ceramic Tapered Tiles, Ceramic Cylinders, Stell Lined with Ceramic Tiles, Irregular Shaped Tile, Clipping Ceramic Tiles Interlocking Bricks.

We have so many kinds of sizes. And we are also accept customized.