92% Al2O3 High Alumina Hex Tile Mats for Industrial Wear Protection

Product Description

 92% Al2O3 High Alumina Hex Tile Mats for Industrial Wear protection 

Product Description

Hexagonal Alumina ceramic Liner are used as wear solutions for coal and other material handling and processing industries. Ceramic linings provide long-lasting solutions to the problems caused by abrasive wear and corrosion in a variety of hostile environments. Alumina ceramic linings will outlast lower grade materials commonly used to line or protect processing and material handling equipment, including Basalt, stainless steel, carbon steel and wear resistant plates, by factors of 3 to 15 times.

The first priority of our engineers is to fully understand your requirements. As we listen and learn, we consider factors such as:

Material being conveyed
Abrasion type (sliding or impingement)
Equipment design
Installation position
Pipe diameter and temperature
Industrial ceramic linings are a great option for guarding against abrasion, erosion or corrosion. However, ceramic linings are only effective when they are selected and installed properly.
Monolithic shapes and custom engineered integrated tile systems can be provided for pieces with irregular geometries (such as elbows, tees and lateral wyes) where standard tiles are not cost-effective. Engineered solutions like these ensure an exact fit and 100% ceramic protection.

Applications include:

Pipe & fittings
Chutes & hoppers
Vibratory feeders
Cyclones
Distributors
Screens
Centrifuges
Mill liners

Most importantly, the alumina ceramic linings will extend the life of your equipment while reducing maintenance costs and downtime. Contact us today to tell us more about your ceramic lining needs.
 

Product Parameters

 

Category	HC90	HC92	HC95	HCT95	HC99	HC-ZTA	ZrO2
Al2O3	≥90%	≥92%	≥95%	≥ 95%	≥ 99%	≥75%	/
ZrO2	/	/	/	/	/	≥21%	≥95%
Density	>3.50g/ cm3	>3.60g/cm3	>3.65g/cm3	>3.70g/cm3	>3.83g/cm3	>4.10g/cm3	>5.90g/cm3
HV 20	≥900	≥950	≥1000	≥1100	≥1200	≥1350	≥1100
Rock Hardness HRA	≥80	≥82	≥85	≥88	≥90	≥90	≥88
Bending Strength MPa	≥180	≥220	≥250	≥300	≥330	≥400	≥800
Compression strength MPa	≥970	≥1050	≥1300	≥1600	≥1800	≥2000	/
Fracture Toughness KIc MPam 1/2	≥3.5	≥3.7	≥3.8	≥4.0	≥4.2	≥4.5	≥7.0
Wear Volume	≤0.28 cm3	≤0.25cm3	≤0.20cm3	≤0.15cm3	≤0.10 cm3	≤0.05cm3	≤0.02cm3

Company Profile

Zibo Qimingxing New Material Incorporated Co.,Ltd

1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over350 staffs.
4.Three Own-designed production lines, the ball mils are own produced.

QMX provides wear resistant solutions to all industries including Mining, Mineral , Base & Precious Metal Smelting, Power Generation (coal fired power stations), Iron and Steel, Cement & Lime Manufacture, and Petro-Chemical Refining and Production. 
 
We supply a wide range of pre-engineered alumina ceramic tiles tailor-made to suit any type of application such as short and long radius small and large bore pipes and pipe bends, square to round transitions, cones etc. The company also supply and install a range of pump impellers, expeller rings, and valves.
 

FAQ

1. Are you a trading company or a factory?
We are a leading factory, manufacturing high alumina ceramic wear resistant liners in Zibo, China

2. What is your monthly capacity?
800 ton per month

3. What kinds of ceramic wear resistant liners do you manufacture?
92%alumina liner, 95%alumina liner, T95%alumina liner, zirconia tile liner, ZTA tiles , ceramic-
rubber composite plates, wearing compound

4. What is the delivery time?
If we have stock, the delivery time is within 3days after order confirmed. If there is no stock, it
is usually 13days.

5. Can you manufacture ceramic liner according to customers' desgin?

Yes, we have 5 engineers and we can produce ceramic parts according to the drawings of the
customers.

6. What is the packing?
carton, and then wooden pallet or wooden box, 20-25tons per 1*20"FCL

7. What is the nearest port?
Qingdao port