Composite Rubber SIC ceramic Panels, Super Abrasion Resistant SiC Embedded in Rubber Liners
Product Description
Alumina Ceramic tile and lining: Vulcanized in special rubber, the ceramic lining can conveniently be fixed on components of systems where serious wearing occurs, and highly temperature and impact as well.
Direct lined ceramic liner: Adopting high purity alumina powder as materials, ceramic tiles have excellent characteristics of high hardness, superior wear abrasion resistance, amazing impact resistant ability, smooth surface, outstanding dimensional stability, low density and convenient assembly in practice.
Ceramic and rubber composite with steel plate: Those special shaped ceramics are vulcanized in special high temperature resistant rubber and mechanically affixed on armor plate to form synthetic linings which can conveniently screw onto the systems.
Alumina ceramic and rubber lining: The small tiles of ceramics are vulcanized in special rubber and bonded on the internal of systems, and mechanical fixing is feasible as well.
Alumina ceramic and rubber composite lining: Small tiles are vulcanized in special rubber and bonded on armor plate of equipment by strength bond to form wear resistant layer characterized by wear and impact resistance. It is the rubber and composite mats.
Wear Resistant Ceramic lined Pipe: Distinguished from centrifugal cast compound ceramic pipe (SHS), the tiles used in integral abrasion ceramic pipes (RHS) are the same as bonded ceramic tiles. The exclusive feature of this item is its inner smooth surface and excellent wear resistance performance that is particularly suitable for ash or slag removing system.
Mainly the item provides a terminal solution for the extreme wearing problems of the thermal power, metallurgy, steel, coal, cement, chemical industry in which the elbow/bend or pipe component of system is seriously under abrasion or corrosion, especially for the corrosion and wearing of pipes in chemical and smelt industry.
The three-in-one wear-resistant ceramic wear liner (ceramic+rubber +steel plate) adopts a thermal vulcanization process to vulcanize the toughened ceramic in a steel mold equipped with special rubber. The three-in-one ceramic wear liner has incredible wear and impact resistance. It can be used in heavy wear industries such as sand and iron ore mining
S.No |
Material |
Attibutes |
Properties |
1 |
Ceramic Tiles |
Material |
92%,95%,T95%,99%,ZTA |
2 |
Rubber |
Component |
natural rubber, nitrile-butadiene rubber, Flame Retardant, others |
Density |
~1.4g/cm3 |
Tensile strength at break |
≥10.6Mpa |
Elongation at break |
≥350% |
Shore hardness |
65±5 |
Adhesive between tile and rubber |
≥3.8Mpa |
Adhesive between rubber and equipment |
≥3.5Mpa |
Thermal conductivity. (normal temperture) |
2w/m.k |
Aging period |
15years |
Working temperature |
·-50ºC-200ºC |
3 |
Steel plate |
Material |
Q235A |
Denisty |
7.85g/cm3 |
Thickness |
3-8mm |
4 |
Adhesive |
Apperance |
Brown glutinous liquid |
Solid content |
20±3% |
Viscosity |
≥2.5Mpa |
Peel strength |
48h N/2.5cm≥120 |
Compressive strength |
≥850Mpa |
Working temperature |
'-20ºC-100ºC |
Company Profile
1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over350 staffs.
4.Three Own-designed production lines, the ball mils are own produced.
We supply a wide range of pre-engineered alumina ceramic tiles tailor-made to suit any type of application such as short and long radius small and large bore pipes and pipe bends, square to round transitions, cones etc. The company also supply and install a range of pump impellers, expeller rings, and valves.
QMX provides wear resistant solutions to all industries including Mining, Mineral , Base & Precious Metal Smelting, Power Generation (coal fired power stations), Iron and Steel, Cement & Lime Manufacture, and Petro-Chemical Refining and Production.
Certifications
Hot Sales
1. 92%,95%,T95%,99% Alumina ceramic tiles
2. ZTA(Zirconia Toughened Alumina) tiles/brick/block
3. Ceramic Rubber and ceramic-Rubber-steel impact resistant liner
4. Monolihic Cyclone/ cyclone tiles/Ceramic Lined pipe fittings
5. High impact ceramic wearing compound
Exbitions
FAQ
1. Are you are trading company or a factory?
We are a leading factory, manufacturing high alumina ceramic wear resistant liners in Zibo, China
2. What is your monthly capacity?
800 ton per month
3. What kinds of ceramic wear resistant liners do you manufacture?
92%alumina liner, 95%alumina liner, T95%alumina liner, zirconia tile liner, ZTA tiles , ceramic-rubber composite plates, wearing compound
4. What is the delivery time?
If we have stock, the delivery time is within 3days after order confirmed. If there is no stock, it is usually 13days.
5. Can you manufacture ceramic liner according to customers' desgin?
Yes, we have 5 engineers and we can produce ceramic parts according to the drawings of the customers.
6. What is the packing?
carton, and then wooden pallet or wooden box, 20~25tons per 1*20"FCL
7. What is the nearest port?
Qingdao port