| Customization: | Available |
|---|---|
| Application: | Structure Ceramic, Industrial Ceramic, Ball Mill |
| Size: | 0.5-60mm |
|
Still deciding? Get samples of US$ 1/kg
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product code | Chemical Composition | Properties | ||
| HCGA280 | Al2O3 | ≥60% | Density (g/cm3) | 2.9 |
| SiO2 | ≤35% | Bulk Density | 2 | |
| Remainder | ≤5% | Mohs Hardness | 7 | |
| Vickers Hardeness(GPa) | 7 | |||
| Color | white | |||
| HCGA320 | Al2O3 | ≥72% | Density (g/cm3) | ≥3.2 |
| SiO2 | ≤23% | Bulk Density | 2.2 | |
| Remainder | ≤5% | Mohs Hardness | 8 | |
| Vickers Hardeness(GPa) | 7.5 | |||
| Color | white | |||
| HCGA360 | Al2O3 | ≥92% | Density (g/cm3) | ≥3.6 |
| SiO2 | ≤5% | Bulk Density | 2.48 | |
| Remainder | ≤3% | Mohs Hardness | 9 | |
| Vickers Hardeness(GPa) | 11 | |||
| Color | white | |||
Most Important key properties of grinding media are size, density, hardness and its composition. We have expertise in grinding and milling processes. Similarly, we can recommend the best-suited grinding and milling media material size and quantity for your application.
The selection of grinding media depends on many most important factors as stated below:
Initial and final particle sizes of the materials - The size of grinding balls should be selected based on the initial and final particle sizes of the material.
Density - Grinding media with higher density usually have better milling efficiency and can lead to the smaller final particle size of the material to be ground. The media should have higher specific gravity than the material which is to be milled.
Hardness - Harder media have higher wear resistance, less contamination and thus better milling efficiency.
Composition - The selection of media composition depends on the compatibility with the material to be milled. and also the container and liner materials used in the milling process. Because the goal is to minimize contamination during milling and yet to achieve the best milling effect.
Cost - Zirconia milling media typically have a higher cost than alumina and agate milling media. However, they are also more wear resistant and provide better milling efficiency. therefore, the actual milling costs can be lower even though the grinding media cost is higher.
| Zirconia Toughened Alumina Grinding Media/Zirconium Silicate Grinding Media | ||||||
| HCGG410 | HCTA370 | HCTA380 | HCTA450 | HCTA470 | HCTA500 | |
| ZrO2(%) | ≥50% | ≥12% | ≥18% | ≥62% | ≥70% | ≥75% |
| Mohs Hardness | 8 | 7 | 8 | 8 | 8 | 8 |
| Bulk Density(g/cm3) | ≥4.1 | ≥3.7 | ≥3.8 | ≥4.5 | ≥4.7 | ≥5.0 |
| Wear Loss Rate(g/kg.h) | ≤1.2 | ≤1.5 | ≤1.3 | ≤1.5 | ≤1.5 | ≤1.0 |
| Diameter Size | Ø1-13mm | Ø1-13mm | Ø1-13mm | Ø1-13mm | Ø1-13mm | Ø1-13mm |
Qimingxing offer quality wear and Ant- impact ceramics, in combination with our experienced and competent staff, ensure the increased efficiency and service life of all equipments and materials to which they are applied. - Established Ultrafine Energy Efficiency Technology Research Institute - Increase lifespan of wearable parts - New improved technology and products - Minimal downtime to minimize delays in production - Variety of wear combating options available as a one stop solution - Strong focus on product innovation supported by Chinese Academy of Sciences. - Customized application techniques to suite any wear problem
More Abrasion ceramics products : abrasion ceramics , Alumina ceramics , wear resistant ceramics , alumina pipe liner , ceramic tube , alumina cylinder pipe , wear resistant alumina plate , abrasion ceramic tile , abrasive alumina sheet , friction plain tile , abrasion weldable tile , rubber backed ceramic liner , ceramic composite linings , alumina mosaic sheet , ceramic taper tile for pipe sleeve , ceramic ladder tile for pipe steel , engineering ceramics equipment , pre-fabricated pipe sleeve ,wear resistant bending pipe , abrasion materials
Q: What is your experience in your products?
A: We have 25 years experience in this industry line. We are professional manufacturer in this area.
Q: What is your MOQ?
A: The MOQ is different as per different products, for example, 1 Ton for ceramic ball.
Q: Can you accept small quantity sample order before production?
A: Yes, we can offer sample for your testing first.
Q: Can you provide free sample?
A: Yes, within 1kg.
Q: What is your production time?
A: We have large stock for standard products. Normally within 7-10days after receipt the deposit.
Q: What are your payment terms?
A: T/T, L/C, Western Union
){kind=link}