High-Performance Zta Grinding Media Balls for Fine Material

Product Description

Zirconia Toughened Alumina (ZTA) Grinding Media Balls for Ultrafine Grinding
 

Product Description

Grinding media is used in wet milling and dry milling operations.  Grinding Media is typically a bead of uniform size, shape, and density.  The media is agitated in high concentration with a slurry (or mill base) to be ground.  In a small media mill a central shaft agitates the media and slurry.  Energy is transferred from that shaft to the nearest layer of beads and from that layer to subsequent layers of beads.  It is within that power transmission that the mill base is exposed to extremely high shear and impact forces.

Media Size is chosen both based on the type agitated equipment or mill and the agglomerate size of the slurry. For best stress transfer in a mill it is traditionally recommended that media diameter to particle diameter be 10:1 or greater.  Large media enhance impact forces while small media cause more collisions.

Media Density affects impact energy in the mill.  Denser media impart higher impact forces.  However, there are limits.  Mill base viscosity must be sufficient to support these high densities.  Dense media in low viscosity mill base can result in increased media packing, temperature rise, and mill and media wear.

All grinding media is not created equal. Qimingxing offers a broad range of media for you wet milling operation. We can assist with media selection for your particular products and production equipment. Whether you operate sand mills, horizontal mills, basket mills, attritors or vertical mills, we have the media you need. From alumima, zirconium silicate, zirconia oxide, Yttria/Ceria Stabilized bead, we carry a broad range of products. We can assist in determining the appropriate material and charge for you mill.

Detailed Photos

 

Product Parameters

 

TDS for ZTA380 Grinding Media
Product Data Sheet
Characteristics		Data
Composition	Al2O3 Content	≥66%
	ZrO2	≥18%
	SiO2 Content	≤12%
	Fe2O3 Content	≤0.1%
	Others	≤4%
Density		≥3.80 g/cm3
Vickers Hardness(GPA)		≥11
Water Absorption		≤0.001%
Sphericity		>95%
Color		Light yellow
Packing		pp woven bag or ton bags

 

Company Profile

1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over350 staffs.
4.Three Own-designed production lines, the ball mils are own produced.

The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one,Two-in-one vulcanized ceramic runner sheet,ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.

 

FAQ

1.Are you a direct manufacturer or trader?


We has been founded on 1997 and now has developed into a group company owning three factories, manufacturing alumina powder, alumina grinding media, wear resistant ceramic liner.
Also we have our own vulcanizing plant which manufacture rubber backed ceramic panel.

2.Can you supply samples to check the quality?


Free samples with small quantity can be sent for quality checking.
Express fee can be reduced from bulk order.

3.What is the delivery time?


Most of the rubber backed ceramic panel is customized as customers' application condition. Generally it takes 7~30 days according to the quantity.

4.What is your payment term?


T/T, L/C at sight can be accepted. Also it can be communicated.

5.What is your main markets?


We exported the panels to Australia, Russia, Ukraine, Mongolia, New Zealand, Chile, Peru, South Africa and so on.

6.Can you accept small order?


Yes, orders small or big are from your trust. We will do our best to meet your requirements.

7.Can you receive orders with bulk quantity?


Yes, the production capacity is 18000 tons per year. We have ability to accept the big orders.

8.Can you speak English?


Yes, our staff can speak and write English very well.  We can supply 7*24 service and can reply your inquiry within short time.

9. Besides the rubber backed ceramic panel, what other products you manufacture?


We also can manufacture plain ceramic liner, weldable ceramic liner, trapezoidal ceramic liner, curved ceramic liner, ceramic grinding media, ZTA 370/380 grinding media, silicate zirconia grinding media, yttria stabilized zirconium grinding media, ceria zirconium grinding media, alumina powder, yttria zirconium powder and so on.

10.Where are you located?


Our factory is in Zibo city, Shandong province, North of China. Zibo is an famous industrial city in China and we are near Jinan airport. Welcome to visit our factory.
 

Hot Sale Products

Ceramic Liner:  plain ceramic liner, weldable ceramic liner, trapezoidal ceramic liner, ceramic cylinder, ceramic block, alumina wear liner, rubber backed ceramic panel, ceramic composite panel, mining wear liner and so on.

 

Ceramic Grinding Media: 92% alumina media, 95% alumina media, 99% alumina media, ZTA 370 grinding media, ZTA380 grinding media, ZTA 450 grinding media, ZTA 470 grinding media, silicate zirconia grinding media, yttria stablized zirconia grinding media, ceria stablized zirconia grinding media and so on.