Product description :
| Category |
HC92 |
HC95 |
HCT95 |
HC-ZTA |
| Al2O3 |
≥92% |
≥95% |
≥ 95% |
≥75% |
| ZrO2 |
/ |
/ |
/ |
≥21% |
| Density |
>3.60g/cm3 |
>3.65g/cm3 |
>3.70g/cm3 |
>4.10g/cm3 |
| HV 20 |
≥950 |
≥1000 |
≥1100 |
≥1350 |
| Rock Hardness HRA |
≥82 |
≥85 |
≥88 |
≥90 |
| Bending Strength MPa |
≥220 |
≥250 |
≥300 |
≥400 |
| Compression strength MPa |
≥1050 |
≥1300 |
≥1600 |
≥2000 |
| Fracture Toughness KIc MPam 1/2 |
≥3.7 |
≥3.8 |
≥4.0 |
≥4.5 |
| Wear Volume |
≤0.25cm3 |
≤0.20cm3 |
≤0.15cm3 |
≤0.05cm3 |
If you want to get a quick quote, please send us these details:
1.Sample quantity, bulk order quantity
2. Application industry
3.Target price
4. Sample shipping address
5. If you need customization, please send us the specific composition, size, and drawing
1. Welding type
Welding wear-resistant ceramics are fixed by welding or gluing. After the wear-resistant ceramic is installed on the surface of the equipment, the application range of the wear-resistant ceramic is greatly expanded. It is suitable for the abrasion resistance of the pneumatic conveying systems under severe working conditions such as high temperature and impact. The high-temperature resistance can reach 800 ºC.
2.Product features:
> High hardness
> Superior abrasion and impact resistance
> Corrosion and chemical resistance
> Light weight
> Easy installation by epoxy resin or bolt
> Improve your working environment-noise, vibration and safety
3. Product Specification:
- Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.
- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.
- Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm
- Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)
- Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc.
- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.
4. Ceramic wear lining tiles for a variety of applications:
Processing equipment:
Pharmaceutical clean rooms/Food processing plants/Grain handling/Mineral processing/Cement manufacturing/Chemical processing/Large Cyclones/Coal-fired power plants/Steel Mills/Asphalt Plants/Petrochemical plants/Pulp and paper mills
Mineral Processing equipment operates in some of the harshest and remote locations. It is crucial to the Mineral Processing industries that this equipment continues to operate efficiently and its lifecycle is maximised to minimise down time. By appropriately protecting equipment from the extreme wear caused by the high speed and flow rates of ore when processed as a slurry ensures better equipment longevity. Slurry is highly abrasive and can not only cause wear damage to wet processing equipment but also with the inclusion of chemicals and heat, there is constant risk of corrosion and dangerous leakage.
Wear Protection ceramic Linings are used throughout Mineral Processing to protect the steel surfaces of equipment from wear and corrosion. They are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders and feed spouts or chutes.
Audited Supplier 
){kind=link}
){kind=link}