| Customization: | Available |
|---|---|
| Standard: | ISO9001:2015 |
| Application: | Metallurgical Machinery, Cement Plant, Mining Machine, Coal Yard, Chemical |
|
Still deciding? Get samples of US$ 0.1/kg
Request Sample
|
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Grinding media is used in wet milling and dry milling operations. Grinding Media is typically a bead of uniform size, shape, and density. The media is agitated in high concentration with a slurry (or mill base) to be ground. In a small media mill a central shaft agitates the media and slurry. Energy is transferred from that shaft to the nearest layer of beads and from that layer to subsequent layers of beads. It is within that power transmission that the mill base is exposed to extremely high shear and impact forces.
Media Size is chosen both based on the type agitated equipment or mill and the agglomerate size of the slurry. For best stress transfer in a mill it is traditionally recommended that media diameter to particle diameter be 10:1 or greater. Large media enhance impact forces while small media cause more collisions.
Media Density affects impact energy in the mill. Denser media impart higher impact forces. However, there are limits. Mill base viscosity must be sufficient to support these high densities. Dense media in low viscosity mill base can result in increased media packing, temperature rise, and mill and media wear.
All grinding media is not created equal. Qimingxing offers a broad range of media for you wet milling operation. We can assist with media selection for your particular products and production equipment. Whether you operate sand mills, horizontal mills, basket mills, attritors or vertical mills, we have the media you need. From alumima, zirconium silicate, zirconia oxide, Yttria/Ceria Stabilized bead, we carry a broad range of products. We can assist in determining the appropriate material and charge for you mill.
Features:
1. Wide application range, especially for grinding materials with high hardness and viscosity.
2. Larger specific gravity, high grinding kinetic energy and low filling quantity.
3. Resistance to a variety of chemical liquids corrosion.
4. Smooth surface, easy to clean, less wears to the equipment.
5. High mechanical strength, impact resistance, no break under high speed operation.
6. High grinding efficiency, low wear loss and low comprehensive cost
Applications:
*Wear-resistant .corrosion-resistant products: paper making ,coating ,textile ,pigment and dye.
*High strength, high toughness products : magnetic materials, piezoelectric ceramics ,dielectric ceramics.
*Ceramics: electric ceramics,refractory ceramics ,structural ceramics.
*Medicine ,food ,cosmetics
| Product code | Chemical Composition | Properties | ||
| HCGA280 | Al2O3 | ≥60% | Density (g/cm3) | 2.9 |
| SiO2 | ≤35% | Bulk Density | 2 | |
| Remainder | ≤5% | Mohs Hardness | 7 | |
| Vickers Hardeness(GPa) | 7 | |||
| Color | white | |||
| HCGA320 | Al2O3 | ≥72% | Density (g/cm3) | ≥3.2 |
| SiO2 | ≤23% | Bulk Density | 2.2 | |
| Remainder | ≤5% | Mohs Hardness | 8 | |
| Vickers Hardeness(GPa) | 7.5 | |||
| Color | white | |||
| HCGA360 | Al2O3 | ≥92% | Density (g/cm3) | ≥3.6 |
| SiO2 | ≤5% | Bulk Density | 2.48 | |
| Remainder | ≤3% | Mohs Hardness | 9 | |
| Vickers Hardeness(GPa) | 11 | |||
| Color | white | |||
Packaging :
1. Established in 1997,25 years experience in wear solutions products.
2. The factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over 400 staffs.
4. Three Own-designed production lines, the ball mils are own produced.
The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one, Two-in-one vulcanized ceramic runner sheet, ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.
Q: Are you a trading company or manufacturer?
A: We are a?factory.
Q: Is the sample free?
A: Yes, we offer free samples.
The sample air shipping fee will be returned when the bulk order.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: What are your terms of payment?
A: 30% T/T in advance, balance before shipment.
Q: Accept customized?
A: Yes. Kindly send all your details to our worker, please
){kind=link}