Product Introduction :
| Category |
HC90 |
HC92 |
HC95 |
HCT95 |
HC99 |
HC-ZTA |
ZrO2 |
| Al2O3 |
≥90% |
≥92% |
≥95% |
≥ 95% |
≥ 99% |
≥75% |
/ |
| ZrO2 |
/ |
/ |
/ |
/ |
/ |
≥21% |
≥95% |
| Density |
>3.50g/ cm3 |
>3.60g/cm3 |
>3.65g/cm3 |
>3.70g/cm3 |
>3.83g/cm3 |
>4.10g/cm3 |
>5.90g/cm3 |
| HV 20 |
≥900 |
≥950 |
≥1000 |
≥1100 |
≥1200 |
≥1350 |
≥1100 |
| Rock Hardness HRA |
≥80 |
≥82 |
≥85 |
≥88 |
≥90 |
≥90 |
≥88 |
| Bending Strength MPa |
≥180 |
≥220 |
≥250 |
≥300 |
≥330 |
≥400 |
≥800 |
| Compression strength MPa |
≥970 |
≥1050 |
≥1300 |
≥1600 |
≥1800 |
≥2000 |
/ |
| Fracture Toughness KIc MPam 1/2 |
≥3.5 |
≥3.7 |
≥3.8 |
≥4.0 |
≥4.2 |
≥4.5 |
≥7.0 |
| Wear Volume |
≤0.28 cm3 |
≤0.25cm3 |
≤0.20cm3 |
≤0.15cm3 |
≤0.10 cm3 |
≤0.05cm3 |
≤0.02cm3 |
1.Ceramic wear-resistant lining board with snap button
This kind of lining brick is stronger than the general flat ceramic lining board, because it has a lock, and the glue is attached to make the installation of the ceramic lining board stronger.
Because the thickness is relatively thin, it is suitable for use in pipes with relatively small inner diameters, ball mills, and other machinery.
2. Product Specification:
- Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.
- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.
- Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm
- Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)
- Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc.
- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.
3 Ceramic wear lining tiles for a variety of applications:
Processing equipment:
Pharmaceutical clean rooms/Food processing plants/Grain handling/Mineral processing/Cement manufacturing/Chemical processing/Large Cyclones/Coal-fired power plants/Steel Mills/Asphalt Plants/Petrochemical plants/Pulp and paper mills.
Our Company :
1.Established in 1997,20 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2000 certified,over 260 staffs.
4.Three Own-designed production lines, the ball mils are own produced.
The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one,Two-in-one vulcanized ceramic runner sheet,ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.
Packaging :
1.Packaged with carton box.
2.There are compartments in the cartons to prevent friction.
About package and shipping mark all could be customzied.
Kindly contact with Amy please : )
FAQ :
Q: Are you a manufacturer?
A: YES.
Q: Is the sample free?
A: Yes, the sample air shipping fee will be returned when bulk order.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: What are your terms of payment?
A: T/T 30% as the deposit, the balance against copy of B/L after shipment.
Q: Accept customized?
A: Yes.Kindly send all your details to our worker, please.
If you have any questions, kindly contact Amy : )
){kind=link}