High Wear Resistant Alumina Ceramic Liner Tile for Ball Mill

• Customization: Available
• Standard: ISO9001:2000
• Application: Metallurgical Machinery, Cement Plant, Mining Machine, Coal Yard
• Model NO.: ceramic liner
• Material: Aluminum
• Type: Wear Resistant Plate
• Color: White
• Al2O3: >92%
• Usage: Lining of Equipment and Pipe
• Wear Rate ‰: <0.25
• Ceramic Mohs Hard Ness: 9
• Shipping Way: Fob, CIF, DDP, DDU etc
• Size: Customzied
• Shape: Square
• Export Markets: Global
• Certification: ISO
• Function: Grinding
• Sample Time: 3-15 Days
• Bulk Order Time: 15-30 Days
• Customized: Accept
• Key Words: Alumina Ceramic Brick Lining
• Transport Package: Carton Package, Then on Pallet
• Specification: Al2O3 over 92%
• Trademark: ZIBO QIMINGXING NEW MATERIAL
• Origin: China Shandong Zibo
• HS Code: 6909120000
• Production Capacity: 17000 Tons Per Year

Product Description

Wear Resistant Alumina Ceramic Liner Plate For Ball Mill 

 

Product Description

 

Category	HC90	HC92
Al2O3	≥90%	≥92%
ZrO2	/	/
Density	>3.50g/ cm3	>3.60g/cm3
HV 20	≥900	≥950
Rock Hardness HRA	≥80	≥82
Bending Strength MPa	≥180	≥220
Compression strength MPa	≥970	≥1050
Fracture Toughness KIc MPam 1/2	≥3.5	≥3.7
Wear Volume	≤0.28 cm3	≤0.25cm3

How to use the ceramic wear liner of ball mill?

The ceramic liner of the ball mill is generally bonded with white cement or wear-resistant ceramic structural glue.
1. Preparation of the ball mill: Any bricks or cement residues, welding slag, rust, and oil stains on the inner surface of the ball mill should be removed. The smooth surface should be roughened to improve the bonding effect.
2. The installation of the lining bricks starts from the end face of the ball mill. All the end faces are installed with straight bricks and straight half bricks. All lining brick working faces should face the ball mill. The snap buttons of the installation parts should be fastened, and the bricks on the upper layer should overlap and be pressed tightly. On the joints of the two bricks below, the two rows of bricks should be installed staggered. After installing several lining bricks, you must use a rubber hammer or wooden hammer to gently tap the adhesive to spread the adhesive evenly between the brick and the brick and the brick and the wall to ensure the bonding quality and strictly control the brick and the brick. The gap should be less than 1.5mm.
3. After installing the two ends, start to install the cylinder, calculate the number of rows of straight bricks and oblique bricks according to the amount of lining bricks of the cylinder, and install them alternately according to the number of straight and oblique rows calculated in the second step to ensure the bottom of the lining bricks Close to the inner wall of the cylinder, the inner diameter of the lining bricks should be smoothly connected after being built. Each row along the length direction should use straight or oblique bricks of the same specification. Use half bricks to adjust the brick joints at the end to maintain each phase. The bricks of the two adjacent rows are staggered. If the straight bricks cannot enter the last row, install thin bricks and seal the gaps with cement.
 

Cases

Detailed Photos

The length and thickness of the ceramic lining used in ball mills of different sizes are different. We are a manufacturer and supplier of specialized ceramic wear plates. The lining of the ball mill can be customized according to the size of your ball mill.

 

Company Profile

 

The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one,Two-in-one vulcanized ceramic runner sheet,ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.


1.Established in 1997,23years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.SGS, ISO9001:2000 certified,over 360 staffs.
4.Three Own-designed production lines, the ball mils are own produced.



 

Packaging & Shipping

 

 

1.Packaged with carton box.
2.There are compartments in the cartons to prevent friction.

 
About package and shipping mark all could be customzied.
Kindly contact with Amy please : ) 
 

Certifications

 

 

FAQ

 

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: Is the sample free ?
A: Yes,we offer free samples.
    The sample air shipping fee will be return when bulk order. 

Q: How long is your delivery time ?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.

Q: What is your terms of payment ?
A: 30% T/T in advance ,balance before shippment.

Q: Accept customized?
A: Yes.Kindly send all your details to our worker please.
 

If you have any questions, please sent inquiry to Amy : )
 

Other Hot Sale

 

1. Flat ceramic lining 150*100*10-35mm, 150*50mm,etc.
2. 92% alumina ceramic tube. Thickness 10mm.
3. 92% alumina Cylinder lining. φ10*10mm, φ20*20mm, φ25*25mm,  φ30*30mm, φ40*40mm

Any samples needs, sent inquiry to Amy!