Supply of Ceramic Pipe Elbows/High-Alumina Ceramic Weldalbe Liners /pipe tiles
1.Product Introduction :
Used in heavy industry for years as a cost-effective, wear-resistant solution, these lightweight materials offer high durability, strength, and excellent abrasion and corrosion resistance. Alumina wear resistant compositions include:
l Alumina 92: most common wear product with great wear resistance
l Alumina 95: increased wear performance
l Alumina 96: premium alumina for best wear resistance
l Zirconium toughened alumina(ZTA): increased strength and impact resistance
| Category |
HC90 |
HC92 |
HC95 |
HCT95 |
HC99 |
HC-ZTA |
ZrO2 |
| Al2O3 |
≥90% |
≥92% |
≥95% |
≥ 95% |
≥ 99% |
≥75% |
/ |
| ZrO2 |
/ |
/ |
/ |
/ |
/ |
≥21% |
≥95% |
| Density |
>3.50g/ cm3 |
>3.60g/cm3 |
>3.65g/cm3 |
>3.70g/cm3 |
>3.83g/cm3 |
>4.10g/cm3 |
>5.90g/cm3 |
| HV 20 |
≥900 |
≥950 |
≥1000 |
≥1100 |
≥1200 |
≥1350 |
≥1100 |
| Rock Hardness HRA |
≥80 |
≥82 |
≥85 |
≥88 |
≥90 |
≥90 |
≥88 |
| Bending Strength MPa |
≥180 |
≥220 |
≥250 |
≥300 |
≥330 |
≥400 |
≥800 |
| Compression strength MPa |
≥970 |
≥1050 |
≥1300 |
≥1600 |
≥1800 |
≥2000 |
/ |
| Fracture Toughness KIc MPam 1/2 |
≥3.5 |
≥3.7 |
≥3.8 |
≥4.0 |
≥4.2 |
≥4.5 |
≥7.0 |
| Wear Volume |
≤0.28 cm3 |
≤0.25cm3 |
≤0.20cm3 |
≤0.15cm3 |
≤0.10 cm3 |
≤0.05cm3 |
≤0.02cm3 |
Some ceramic lining sizes for your reference:
2.Product features:
> High hardness
> Superior abrasion and impact resistance
> Corrosion and chemical resistance
> Lightweight
> Easy installation by epoxy resin or bolt
> Improve your working environment-noise, vibration, and safety
3. Other Product Specification:
- Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.
- Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm
- Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)
- Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc.
- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.
1. Established in 1997,20 years experience in wear solutions products.
2. The factory is under expanding, the total construction area is 50,000 sqm.
3. ISO9001:2000 certified,over 260 staffs.
4. Three Own-designed production lines, the ball mils are own produced.
Detailed Photos
The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one, Two-in-one vulcanized ceramic runner sheet, ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.
Packaging :
1. Packaged with carton box.
2. There are compartments in the cartons to prevent friction.
Company Profile
ZIBO QIMINGXING NEW MATERIAL is located in Zibo, Shandong,Near Qingdao port. With an excellent geographical location and a convenient logistics system,This enable us to provide you varies transportation modes (by express/air/sea) according to your needs. Also, ensure us OTD and save your shipping cost. Our 86700 m2 factory has obtained ISO 9001 and ISO 14001 certification and employs over 350 staff members who enable us to provide you with fully custom services upon request.
We accept customized designs, packing, logo or custom material. We can make custom design based on your inquiry. We provide NDA agreement to keep your design in private.
Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee your satisfaction.
Our business staff have 7~10 years of experience in the industry and can provide you with quality services. All your inquiries will be responded within 24 hours.
PROFESSIONAL
FULL SERVICE
PROTECTION FOR YOUR BENEFIT
FAQ
Q: What is your experience in your products?
A: We have 23 years experience in this industry line. We are professional manufacturer in this area.
Q: What is your MOQ?
A: The MOQ is different as per different products, for example, 1 Ton for ceramic ball.
Q: Can you accept small quantity sample order before production?
A: Yes, we can offer sample for your testing first.
Q: Can you provide free sample?
A: Yes, within 10kg.
Q: What is your production time?
A: We have large stock for standard products. Normally within 7-10days after receipt the deposit.
Q: What are your payment terms?
A: T/T, L/C, Western Union
){kind=link}