| Customization: | Available |
|---|---|
| Application: | Refractory, Structure Ceramic, Industrial Ceramic |
| Type: | Ceramic Plates |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High purity and impact Al2O3 Ceramic tiles with Factory Prices
1. Detailed description:
alumina ceramic liners and rubber ceramic composited plates
The alumina ceramic liner is a high-performance abrasion and impact resistant lining for applications in iron ore industry, coal mining, aggregate industry, power industry, cement industry, agricultrual industry and chemical industry.
They are used in heavy industry for years as a cost-effective, wear-resistant solution and these light weight materials offer high durability, strength, and excellent abrasion and corrosion resistance.
The main alumina ceramic liners our factory produce are as following:
- Alumina 92: most common wear product with great wear resistance
- Alumina 95: increased wear performance
- Alumina 96: premium alumina for best wear resistance
- Zirconium toughened alumina(ZTA TILES): increased strength and impact resistance
2.Product features:
> High hardness
> Superior abrasion and impact resistance
> Corrosion and chemical resistance
> Light weight
> Easy installation by epoxy resin or bolt
> Improve your working environment-noise, vibration and safety
3. Product Specification:
- Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.
- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.
- Hexagonal tile: S11.5xT3~20mm, S12.5xT3~20mm, S23.5xT6-25mm
- Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)
- alumina ceramic mosaic mat/sheet, hextile mat/sheet: 150x150x3mm to 15mm , 300x300x3 to 15mm, 500x500x3 to 10mm
- Ceramic Block: 32x32x22mm, 38x38x38mm, 40x40x40mm, 45x45x50mm, 47.5x47.5x15 to 40mm, etc.
- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.
- rectangular ceramic tile: 150x100x6 to 50mm, 100x50x6 to 50mm, 150x50x6 to 50mm
- weldable alumina ceramic tile with ceramic plug and ferrule: 150x100x10 to 50mm, 100x50x10 to 50mm, 150x50x10 to 50mm
- Taperzoidal alumina ceramic tile (pipe tile)150x60/57x10 to 25mm, 150x5047x10 to 25mm, 150x40/37x10 to 25mm, 150x30/27x10 to 25mm
- Rubber ceramic composite plates: 300x300x37mm, 300x300x63mm, 250x500x35mm, 500x500x5 to 65mm
5. Ceramic wear lining tiles for a variety of applications:
Processing equipment:
Pharmaceutical clean rooms
Food processing plants
Grain handling
Mineral processing
Cement manufacturing
Chemical processing
Large Cyclones:
Coal-fired power plants
Steel Mills
Asphalt Plants
Petrochemical plants
Pulp and paper mills
Physical property of alumina ceramic and ZTA tile:
| Category | HC90 | HC92 | HC95 | HCT95 | HC99 | HC-ZTA | ZrO2 |
| Al2O3 | ≥90% | ≥92% | ≥95% | ≥ 95% | ≥ 99% | ≥75% | / |
| ZrO2 | / | / | / | / | / | ≥21% | ≥95% |
| Density | >3.50g/ cm3 | >3.60g/cm3 | >3.65g/cm3 | >3.70g/cm3 | >3.83g/cm3 | >4.10g/cm3 | >5.90g/cm3 |
| HV 20 | ≥900 | ≥950 | ≥1000 | ≥1100 | ≥1200 | ≥1350 | ≥1100 |
| Rock Hardness HRA | ≥80 | ≥82 | ≥85 | ≥88 | ≥90 | ≥90 | ≥88 |
| Bending Strength MPa | ≥180 | ≥220 | ≥250 | ≥300 | ≥330 | ≥400 | ≥800 |
| Compression strength MPa | ≥970 | ≥1050 | ≥1300 | ≥1600 | ≥1800 | ≥2000 | / |
| Fracture Toughness KIc MPam 1/2 | ≥3.5 | ≥3.7 | ≥3.8 | ≥4.0 | ≥4.2 | ≥4.5 | ≥7.0 |
| Wear Volume | ≤0.28 cm3 | ≤0.25cm3 | ≤0.20cm3 | ≤0.15cm3 | ≤0.10 cm3 | ≤0.05cm3 | ≤0.02cm3 |
ZIBO QIMINGXING NEW MATERIAL is located in Zibo, Shandong,Near Qingdao port. With an excellent geographical location and a convenient logistics system,This enable us to provide you varies transportation modes (by express/air/sea) according to your needs. Also, ensure us OTD and save your shipping cost. Our 86700 m2 factory has obtained ISO 9001 and ISO 14001 certification and employs over 350 staff members who enable us to provide you with fully custom services upon request.
We accept customized designs, packing, logo or custom material. We can make custom design based on your inquiry. We provide NDA agreement to keep your design in private.
Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee your satisfaction.
Our business staff have 7~10 years of experience in the industry and can provide you with quality services. All your inquiries will be responded within 24 hours.
PROFESSIONAL
FULL SERVICE
PROTECTION FOR YOUR BENEFIT
Q: What is your experience in your products?
A: We have 23 years experience in this industry line. We are professional manufacturer in this area.
Q: What is your MOQ?
A: The MOQ is different as per different products, for example, 1 Ton for ceramic ball.
Q: Can you accept small quantity sample order before production?
A: Yes, we can offer sample for your testing first.
Q: Can you provide free sample?
A: Yes, within 10kg.
Q: What is your production time?
A: We have large stock for standard products. Normally within 7-10days after receipt the deposit.
Q: What are your payment terms?
A: T/T, L/C, Western Union
){kind=link}