Quality Zirconia Toughened Alumina (ZTA) Ceramic Lightweight Cement Wear Plates

• Customization: Available
• Standard: ISO
• Application: Loader, Construction Machinery, Metallurgical Machinery, Cement Plant, Mining Machine, Thermal Power Plant, Coal Yard
• Model NO.: ZTA tiles
• Material: Aluminum
• Type: Wear Resistant Ceramic
• Square Tile: 10X10X3~10mm, 17.5X17.5X3~15mm, 20X20X3~15mm, etc.
• Ceramic Plate: 100X100X6~50mm, 150X100X6~50mm, etc.
• Hexagonal Tile: S12.5xt3~20mm, S23.5xt6-25mm
• Dimple Tiles: 20X20X4-10+1(with 5 Dimples), 20X30X5~15+1(with 18
• Ceramic Block: 40X40X40mm, 45X45X50mm,32X32X22mm, 38X38X38mm,etc.
• Ceramic Cylinder/Rod: 6X6mm,15X15mm,20X20mm, 31X31mm,40X40mm, 45X50mm, 5
• Al2O3: 75%
• Zro2+Y2o3: 21%
• Density: 4.15 g/cm3
• Hv 20: 1350
• Rock Hardness Hra: 90
• Bending Strength MPa: 400
• Compression Strength MPa: 2000
• Fracture Toughness Kic Mpam 1/2: 5.0
• Wear Volume: 0.05 Cm3
• Transport Package: Box
• Specification: customized size
• Trademark: firstar
• Origin: China
• HS Code: 6909120000
• Production Capacity: 400t/Month

Product Description

 

Product Description

            Quality Zirconia Toughened Alumina (ZTA) Ceramic Lightweight Cement Wear Plates

1. Detailed description
 

Zirconia Toughened Alumina(ZTA) composite ceramic lining board introduces ZrO2 and Y2O3 with similar lattices to Al2O3 in the ceramic formula,  It can refine grains, promote sintering and improve fracture toughness. The fracture toughness of zirconia ceramics is greater than or equal to 7.5MPa•m1/2, which greatly improves the toughness of ceramics.

ZTA ceramic wear liner uses advanced vulcanization technology to vulcanize ZTA ceramic made of alumina and zirconia in rubber, and can also vulcanize ceramic rubber directly on a steel plate. The firmness ensures the reliability of wear resistance and impact resistance. 

ZTA Ceramic wear Liner (NMC-ZTA) is used as an anti-wear lining on equipment with large conveying volume, large material and high impact under normal temperature environment.

> High hardness 
> Superior abrasion and impact resistance 
> Corrosion and chemical resistance 
> Lightweight 
> Easy installation by epoxy resin or bolt 
> Improve your working environment, vibration, and safety

3. Product Specification:
- Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.
- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.
- Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm
- Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)
- Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc.
- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.

4. Ceramic wear lining tiles for a variety of applications:
Processing equipment:
l Pharmaceutical clean rooms
l Food processing plants
l Grain handling
l Mineral processing
l Cement manufacturing
l Chemical processing
l Large Cyclones:
l Coal-fired power plants
l Steel Mills
l Asphalt Plants
l Petrochemical plants
l Pulp and paper mills

Detailed Photos

 

 

Product Parameters

 

Category	HC90	HC92	HC95	HCT95	HC99	HC-ZTA	ZrO2
Al2O3	≥90%	≥92%	≥95%	≥ 95%	≥ 99%	≥75%	/
ZrO2	/	/	/	/	/	≥21%	≥95%
Density	>3.50g/ cm^3	>3.60g/cm^3	>3.65g/cm^3	>3.70g/cm^3	>3.83g/cm^3	>4.10g/cm^3	>5.90g/cm^3
HV 20	≥900	≥950	≥1000	≥1100	≥1200	≥1350	≥1100
Rock Hardness HRA	≥80	≥82	≥85	≥88	≥90	≥90	≥88
Bending Strength MPa	≥180	≥220	≥250	≥300	≥330	≥400	≥800
Compression strength MPa	≥970	≥1050	≥1300	≥1600	≥1800	≥2000	/
Fracture Toughness KIc MPam 1/2	≥3.5	≥3.7	≥3.8	≥4.0	≥4.2	≥4.5	≥7.0
Wear Volume	≤0.28 cm^3	≤0.25cm^3	≤0.20cm^3	≤0.15cm^3	≤0.10 cm^3	≤0.05cm^3	≤0.02cm^3

 

Company Profile

Qimingxing offer quality wear and Ant- impact ceramics, in combination with our experienced and competent staff, ensure the increased efficiency and service life of all equipments and materials to which they are applied. - Established Ultrafine Energy Efficiency Technology Research Institute - Increase lifespan of wearable parts - New improved technology and products - Minimal downtime to minimize delays in production - Variety of wear combating options available as a one stop solution - Strong focus on product innovation supported by Chinese Academy of Sciences. - Customized application techniques to suite any wear problem

Certifications

 

Packaging & Shipping

OTHER HOT SALE

More Abrasion ceramics products : abrasion ceramics , Alumina ceramics , wear resistant ceramics , alumina pipe liner , ceramic tube , alumina cylinder pipe , wear resistant alumina plate , abrasion ceramic tile , abrasive alumina sheet , friction plain tile , abrasion weldable tile , rubber backed ceramic liner , ceramic composite linings , alumina mosaic sheet , ceramic taper tile for pipe sleeve , ceramic ladder tile for pipe steel , engineering  ceramics equipment , pre-fabricated pipe sleeve ,wear resistant bending pipe , abrasion materials

 

FAQ

 

FAQ

Q: What is your experience in your products?
A: We have 22 years experience in this industry line. We are professional manufacturer in this area.
 
Q: What is your MOQ?
A: The MOQ is different as per different products, for example, 1 Ton for ceramic ball.
 
Q: Can you accept small quantity sample order before production?
A: Yes, we can offer sample for your testing first.

Q: Can you provide free sample?
A: Yes, within 1kg.
 
Q: What is your production time?
A: We have large stock for standard products. Normally within 7-10days after receipt the deposit.
 
Q: What are your payment terms?
A: T/T, L/C, Western Union