GB 95% Trapezoidal Shaped Ceramic Alumina Tiles for Heavy Industrial Wear Protection

Product Description

GB 95% Trapezoidal Shaped Ceramic Alumina Tiles for Heavy Industrial Wear Protection

Product Description

Alumina ceramic lining tiles for coal and other material handling and processing industries. Ceramic linings provide long-lasting solutions to the problems caused by abrasive wear and corrosion in a variety of hostile environments. Alumina ceramic linings will outlast lower grade materials commonly used to line or protect processing and material handling equipment, including Basalt, stainless steel, carbon steel and wear resistant plates, by factors of 3 to 15 times.

QM X's wear resistant ceramic tiles can be cut into any shape and are easy to install and maintain. They are suitable for both wet and dry processing applications. Advanced ceramics combine high strength and toughness with extreme hardness to deliver exceptional wear resistance.
 
The ceramic pipe tiles,also called taper tile or Trapezoidal tile, are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders and feed spouts or chutes.

92% Al2O3 China Conductive Tiles Mats is a high-performance abrasion and impact resisting linings for high-impact, high-pressure applications in which ceramic tile may not have sufficient structural resistance, and high-performance rubber may not offer the required wear life. In extreme applications, the liners can be installed in a matrix or abrasion resistant steel plate to provide structural support for the ceramic/rubber matrix and provide exceptional wear life where competing products cannot.

Used in heavy industry for years as a cost-effective, wear-resistant solution, these lightweight materials offer high durability, strength, and excellent abrasion and corrosion resistance. Alumina wear resistant compositions include:
l Alumina 92: most common wear product with great wear resistance
l Alumina 95: increased wear performance
l Alumina T95: premium alumina for best wear resistance
l Zirconium toughened alumina(ZTA): increased strength and impact resistance
 

 

Product Parameters

Character	92	95	T95	99	ZTA	ZrO2
Density(g/cm³)	≥3.6	≥3.65	≥3.7	≥3.83	≥4.15	≥5.9
Al2O3(%)	≥92%	≥95%	≥95%	≥99%	≥75%	/
ZrO2 +Y2O3	/	/	/	/	≥21%	≥99.8%
Bending Strength(MPa)	≥220	≥250	≥300	≥330	≥400	≥800
Compressive Strength (MPa)	≥1050	≥1300	≥1600	≥1800	≥2000	/
Fracture Toughness(MPa.m1/2)	≥3.2	≥3.2	≥3.5	≥3.5	≥5.0	≥7.0
Rockwell Hardness HRA	≥82	≥85	≥88	≥89	≥90	≥88
Vickers Hardness HV20(MPa)	≥950	≥1000	≥1100	≥1200	≥1400	≥1100
Wear Volume(cm³)	≤0.25	≤0.20	≤0.15	≤0.10	≤0.05	≤0.05

Qimingxing Ceramic Tile Series:
Ceramic Mosaic Pieces
Ceramic Pipe Tiles
Ceramic Curved Tiles(with or without holes)
Ceramic Tapered Tiles
Ceramic Cylinders
Steel Lined with Ceramic Tiles
Irregular Ceramic Tiles
Clipping Ceramic Tiles Interlocking Bricks

Certifications

Packaging & Shipping

Our Advantages

Zibo Qimingxing New Material Incorporated Co.,Ltd (Shandong Ultraming Fine Ceramics Co.,Ltd)

1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over 400 staffs.
4.Three Own-designed production lines, the ball mils are own produced.

We supply a wide range of pre-engineered alumina ceramic tiles tailor-made to suit any type of application such as short and long radius small and large bore pipes and pipe bends, square to round transitions, cones etc. The company also supply and install a range of pump impellers, expeller rings, and valves.

QMX provides wear resistant solutions to all industries including Mining, Mineral , Base & Precious Metal Smelting, Power Generation (coal fired power stations), Iron and Steel, Cement & Lime Manufacture, and Petro-Chemical Refining and Production. 

 

Hot Sale Products

1. 92%,95%,T95%,99% Alumina ceramic tiles
2. ZTA(Zirconia Toughened Alumina) tiles/brick/block 
3. Ceramic Rubber and ceramic-Rubber-steel impact resistant liner
4. Monolihic Cyclone/ cyclone tiles/Ceramic Lined pipe fittings
5. High impact ceramic wearing compound 

 

 

FAQ

1. Are you are trading company or a factory? 
We are a leading factory, manufacturing high alumina ceramic wear resistant liners in Zibo, China 

2. What is your monthly capacity? 
800 ton per month 

3. What kinds of ceramic wear resistant liners do you manufacture? 
92%alumina liner, 95%alumina liner, T95%alumina liner, zirconia tile liner, ZTA tiles , ceramic-rubber composite plates, wearing compound 

4. What is the delivery time? 
If we have stock, the delivery time is within 3days after order confirmed. If there is no stock, it is usually 13days. 

5. Can you manufacture ceramic liner according to customers' desgin? 
Yes, we have 5 engineers and we can produce ceramic parts according to the drawings of the customers. 

6. What is the packing? 
carton, and then wooden pallet or wooden box, 20~25tons per 1*20"FCL 

7. What is the nearest port? 
Qingdao port