| Customization: | Available |
|---|---|
| Standard: | ISO9001:2015 |
| Application: | Construction Machinery, Cement Plant, Mining Machine, Thermal Power Plant, Coal Yard |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Ceramic Rubber Liner, also called ceramic rubber wear plate, is embedding 92% al2o3 alumina ceramic tile into energy absorbing rubber or polyurethane matrix, and bond both to steel backing plate via hot vulcanizing for easy installation.
Ceramic Rubber compound lining plate is compounded by high alumina ceramics and excellent natural rubber through special process. The excellent damping performance of natural rubber greatly lowers the noise generated in the transportation, which fully settled a series of issues such as impact, abrasion and noise
Wear-resistant ceramic composite lining is a composite of wear-resistant ceramics and rubber. Small square wear-resistant ceramics are vulcanized (inlaid) in special rubber at high temperature to form a wear-resistant ceramic rubber lining, which is installed in the equipment to prevent wear. In the middle, high-strength organic adhesive is used to bond the lining plate to the inner shell steel plate of the equipment to form a strong and buffering anti-wear layer.
The square or hemispherical wear-resistant ceramic tiles is combined with rubber and steel plate to form a ceramic-rubber-steel composite wear-resistant plate.
The connect ways of three-in-one wear-resistant ceramic rubber composite plate : welding, bolt
The wear-resistant ceramic three-in-one lining plate is a composite of wear-resistant ceramics, rubber and steel plate, to form a wear-resistant layer that is both impact-resistant and cushioning.
| S.No. | Material | Attributes | Properties |
| 1 | Ceramic Tiles |
Material | 92%, 95%, T95%,96%, ZTA |
| 2 | Rubber | Component | natural rubber, nitrile-butadiene rubber ,Flame Retardant ,others |
| Density | ~1.4g/cm3 | ||
| Tensile strength at break | ≥15Mpa | ||
| Elongation at break | ≥250% | ||
| Shore Hardness | 45-65 | ||
| Adhesive between tile and rubber | 1.2-3.0 Mpa | ||
| Adhesive between rubber and equipment | ≥3.5 Mpa | ||
| Thermal conductivity.(normal temperature) | 2w/m·k | ||
| Aging period | ≥15 Years | ||
| Working temperature | -50ºC - 200ºC | ||
| 3 | Steel plate | Material | Q235A |
| Density | 7.85g/cm3 | ||
| Thickness | 5-6mm | ||
| 4 | Adhesive | Appearance | Brown glutinous liquid |
| Solid content | 20±3% | ||
| Viscosity | ≥2.5 Mpa | ||
| Peel strength | 48h N/2.5cm≥120 | ||
| Compressive strength | ≥850 Mpa | ||
| Working temperature | -20ºC - 100ºC |
| Whole Plate (mm) | 150x300, 300x300, 450x000, 500x500, 600x450 etc. |
| Ceramic Size (mm) | Square Tile: 10x10, 20x20, 33x33, 50x50, 100x100, 150x100,etc. |
| Hexagonal Tile: 12x3, 12x6, 19x7, 19x12.5, 19x25,etc. | |
| Locking block with lock and groove: 38x38, 40x40, 30x30,etc. | |
| Dimple Tile: 20x20 with 5 dimples, 20x30 with 18 dimples, 20x30 with 13 dimples, 20x20 with 1 semi-spherical surface |
|
| Ceramic Thickness (mm) | 3-75mm |
| Alloy Steel Size (mm) | Thickness: 3-10mm |
| Rubber Thickness (mm) | Depends on the impact stress expected. |
1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over350 staffs.
4.Three Own-designed production lines, the ball mils are own produced.
The company specializes in the production of HC series wear-resistant ceramic liners(alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate), three-in-one,Two-in-one vulcanized ceramic runner sheet,ceramic mending compound, ceramic lining cyclone, ceramic lining pipe.
){kind=link}