92% Alumina Ceramic Trapezoidal Tiles for Pipe Wear-Resistant Lining

Product Description

Premium 92% Alumina Ceramic Trapezoidal Tiles for Pipe Wear-resistant Lining

Product Description

Ceramic tile is a high density alumina ceramic linings and abrasion resistant tiles provide a remarkable resistance to both sliding and impact abrasion in conveying, processing, and storage equipment.

It is used with advantage of the trapezoidal-shape and the benefit feature of the alumina ceramic in lining steel pipe to avoid corrosion and abrasion. And then reduce the maintenance cost and prolong the use life of the pipes.

Alumina supply and stock a full range of a high density, fine grain and high wear resistant alumina ceramic. It prevent erosion and abrasive wear in conveying and bulk material handling
systems, as well in piping systems.
Plain tile ranging from 3mm-50mm
Weldon tile ranging from 12mm-50mm 
Pipe tile ranging from 12mm-50mm
Hex tile ranging from 3mm-25mm
Interlock tile with T/G (Tongue & Groove) ranging from12mm-50mm
Pre engineered tile ranging from 12mm-25mm for cyclone installation specially.

Industrial ceramic linings are a great option for guarding against abrasion.The alumina ceramic linings will extend the life of your equipment while reducing maintenance costs and downtime. However, ceramic linings are only effective when they are selected and installed properly. 

The first priority of our engineers is to fully understand your requirements. When send inquiries, below factors are needed:
Material being conveyed
Abrasion type (sliding or impingement)
Equipment design
Installation position
Pipe diameter and temperature
 

 

 

Product Parameters

	92	95	T95	99	ZTA	ZrO2
Density(g/cm³)	≥3.6	≥3.65	≥3.7	≥3.83	≥4.15	≥5.9
Al2O3(%)	≥92%	≥95%	≥95%	≥99%	≥75%	/
ZrO2 +Y2O3	/	/	/	/	≥21%	≥99.8%
Bending Strength(MPa)	≥220	≥250	≥300	≥330	≥400	≥800
Compressive Strength (MPa)	≥1050	≥1300	≥1600	≥1800	≥2000	/
Fracture Toughness(MPa.m1/2)	≥3.2	≥3.2	≥3.5	≥3.5	≥5.0	≥7.0
Rockwell Hardness HRA	≥82	≥85	≥88	≥89	≥90	≥88
Vickers Hardness HV20(MPa)	≥950	≥1000	≥1100	≥1200	≥1400	≥1100
Wear Volume(cm³)	≤0.25	≤0.20	≤0.15	≤0.10	≤0.05	≤0.05

 

Packaging & Shipping

Certifications

Company Profile

1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over350 staffs.
4.Three Own-designed production lines, the ball mils are own produced.

We supply a wide range of pre-engineered alumina ceramic tiles tailor-made to suit any type of application such as short and long radius small and large bore pipes and pipe bends, square to round transitions, cones etc. The company also supply and install a range of pump impellers, expeller rings, and valves.

QMX provides wear resistant solutions to all industries including Mining, Mineral , Base & Precious Metal Smelting, Power Generation (coal fired power stations), Iron and Steel, Cement & Lime Manufacture, and Petro-Chemical Refining and Production. 

Hot Sale Products

1. 92%,95%,T95%,99% Alumina ceramic tiles
2. ZTA(Zirconia Toughened Alumina) tiles/brick/block 
3. Ceramic Rubber and ceramic-Rubber-steel impact resistant liner
4. Monolihic Cyclone/ cyclone tiles/Ceramic Lined pipe fittings
5. High impact ceramic wearing compound 

 

FAQ

1.Are you a direct manufacturer or trader?


We has been founded on 1997 and now has developed into a group company owning three factories, manufacturing alumina powder, alumina grinding media, wear resistant ceramic liner.
Also we have our own vulcanizing plant which manufacture rubber backed ceramic panel.

2.Can you supply samples to check the quality?


Free samples with small quantity can be sent for quality checking.
Express fee can be reduced from bulk order.

3.What is the delivery time?


Most of the rubber backed ceramic panel is customized as customers' application condition. Generally it takes 7~30 days according to the quantity.

4.What is your payment term?


T/T, L/C at sight can be accepted. Also it can be communicated.

5.What is your main markets?


We exported the panels to Australia, Russia, Ukraine, Mongolia, New Zealand, Chile, Peru, South Africa and so on.

6.Can you accept small order?


Yes, orders small or big are from your trust. We will do our best to meet your requirements.

7.Can you receive orders with bulk quantity?


Yes, the production capacity is 18000 tons per year. We have ability to accept the big orders.

8.Can you speak English?


Yes, our staff can speak and write English very well.  We can supply 7*24 service and can reply your inquiry within short time.

9. Besides the rubber backed ceramic panel, what other products you manufacture?


We also can manufacture plain ceramic liner, weldable ceramic liner, trapezoidal ceramic liner, curved ceramic liner, ceramic grinding media, ZTA 370/380 grinding media, silicate zirconia grinding media, yttria stabilized zirconium grinding media, ceria zirconium grinding media, alumina powder, yttria zirconium powder and so on.

10.Where are you located?


Our factory is in Zibo city, Shandong province, North of China. Zibo is an famous industrial city in China and we are near Jinan airport. Welcome to visit our factory.