| Standard: | GB |
|---|---|
| Application: | Construction Machinery, Cement Plant, Mining Machine, Thermal Power Plant, Coal Yard |
| Material: | Aluminum |
| Type: | Wear Resistant Plate |
| Content: | 92%,95% Al2O3, Zta |
| Density: | >3.65 |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Ceramic tile is a high density alumina ceramic linings and abrasion resistant tiles provide a remarkable resistance to both sliding and impact abrasion in conveying, processing, and storage equipment.
It is used with advantage of the trapezoidal-shape and the benefit feature of the alumina ceramic in lining steel pipe to avoid corrosion and abrasion. And then reduce the maintenance cost and prolong the use life of the pipes.
Alumina supply and stock a full range of a high density, fine grain and high wear resistant alumina ceramic. It prevent erosion and abrasive wear in conveying and bulk material handling
systems, as well in piping systems.
Plain tile ranging from 3mm-50mm
Weldon tile ranging from 12mm-50mm
Pipe tile ranging from 12mm-50mm
Hex tile ranging from 3mm-25mm
Interlock tile with T/G (Tongue & Groove) ranging from12mm-50mm
Pre engineered tile ranging from 12mm-25mm for cyclone installation specially.
Industrial ceramic linings are a great option for guarding against abrasion.The alumina ceramic linings will extend the life of your equipment while reducing maintenance costs and downtime. However, ceramic linings are only effective when they are selected and installed properly.
The first priority of our engineers is to fully understand your requirements. When send inquiries, below factors are needed:
Material being conveyed
Abrasion type (sliding or impingement)
Equipment design
Installation position
Pipe diameter and temperature
| 92 | 95 | T95 | 99 | ZTA | ZrO2 | |
| Density(g/cm³) | ≥3.6 | ≥3.65 | ≥3.7 | ≥3.83 | ≥4.15 | ≥5.9 |
| Al2O3(%) | ≥92% | ≥95% | ≥95% | ≥99% | ≥75% | / |
| ZrO2 +Y2O3 | / | / | / | / | ≥21% | ≥99.8% |
| Bending Strength(MPa) | ≥220 | ≥250 | ≥300 | ≥330 | ≥400 | ≥800 |
| Compressive Strength (MPa) | ≥1050 | ≥1300 | ≥1600 | ≥1800 | ≥2000 | / |
| Fracture Toughness(MPa.m1/2) | ≥3.2 | ≥3.2 | ≥3.5 | ≥3.5 | ≥5.0 | ≥7.0 |
| Rockwell Hardness HRA | ≥82 | ≥85 | ≥88 | ≥89 | ≥90 | ≥88 |
| Vickers Hardness HV20(MPa) | ≥950 | ≥1000 | ≥1100 | ≥1200 | ≥1400 | ≥1100 |
| Wear Volume(cm³) | ≤0.25 | ≤0.20 | ≤0.15 | ≤0.10 | ≤0.05 | ≤0.05 |
1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over350 staffs.
4.Three Own-designed production lines, the ball mils are own produced.
We supply a wide range of pre-engineered alumina ceramic tiles tailor-made to suit any type of application such as short and long radius small and large bore pipes and pipe bends, square to round transitions, cones etc. The company also supply and install a range of pump impellers, expeller rings, and valves.
QMX provides wear resistant solutions to all industries including Mining, Mineral , Base & Precious Metal Smelting, Power Generation (coal fired power stations), Iron and Steel, Cement & Lime Manufacture, and Petro-Chemical Refining and Production.
1.Are you a direct manufacturer or trader?
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}